Contents
Can you Extrude a line in Solidworks?
Select the sketch entities required for the feature. It is not necessary to select a complete sketch. … Click Extrude (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Extrude, and click in the graphics area to establish the direction of the extrusion.
What is the difference between extrude and protrude?
As verbs the difference between protrude and extrude is that protrude is to extend from, above or beyond a surface or boundary; to bulge outward; to stick out while extrude is to push or thrust out.
Can you make a curved plane in Solidworks?
To project a curve: Click Project Curve on the Curves toolbar, or Insert > Curve > Projected. … Under Direction of Projection , select a plane, edge, sketch, or face as the direction of the projected curve. Under Projection Faces , select the cylindrical face on the model where you want to project the sketch.
Why can’t I extrude cut in Solidworks?
Most times it’s a tiny tiny gap in the shape that won’t let you cut since the profile is not complete. Another option is to just try cut extrude as a “thin feature” though this will not give you the result you want you should be able to see if any gaps exist.
Can we extrude the sketch in both direction?
To extrude in both directions from the sketch plane in the PropertyManager, under Direction 1, select Through All – Both Directions. To extrude as a thin feature, set the PropertyManager options in Thin Feature.
Can you extrude a curve?
Select the edges/or faces you want to extrude and the curve you want to extrude along. Select Edit Mesh > Extrude > . Turn on either the Selected or Generated options. Click Extrude.
What is extrude tool?
Formally, the extrude tool can be defined as a tool that duplicates the selected vertices, edges, and faces, connecting them to the original model in series of the original vertices, edges, or faces. … This tool is useful for creating more vertices for better and more specific modeling.
What is the Presspull command doing in AutoCAD?
The Presspull command in AutoCAD 3D is used to create an area formed by the closed boundary. Or. It is used to pull an enclosed boundary. It can also be used to create a 3D solid in case of the selected circle or interior of the bounded area. The objects, such as arc, can be used to create a 3D surface.
What is the meaning of extrusion?
Extrusion is a process used to create objects of a fixed cross-sectional profile. A material is pushed through a die of the desired cross-section. … The extrusion process can be done with the material hot or cold. Commonly extruded materials include metals, polymers, ceramics, concrete, modelling clay, and foodstuffs.
What are the differences between extrusion and protrusion commands?
The primary difference between the Protrusion command and the Cut command is that a protrusion is a positive space feature, while a cut is a negative space feature. When you protrude a feature, you actually create a solid object. With the Cut command, an extruded feature removes material from existing features.
What is the protrusion?
1 : something (such as an anatomical part or excrescence) that protrudes. 2 : the act of protruding : the state of being protruded.
Why is extrude cut greyed out?
It is greyed out because, as you have described it, you have bodies and not surfaces. TL;DR (more info below): You need to convert the solid body to a surface to use the Trim Surface. Or you need to use something like an Extruded Cut if you are only working with bodies. Or you need to use surfaces from the beginning.
Can we exclude the sketch in both direction?
Yes, using extruded direction selection in the box under the end condition drop down.
How do you extrude a boss in Solidworks?
You can also go to the toolbar and click Insert -> Boss/Base -> Extrude to pull up the Boss-Extrude Feature menu as well. Once the Extrude menu appears on the left-hand side of your screen, it will prompt you to select a plane or sketch that will be used to create a 3D model from.
How do you select multiple faces in Solidworks?
To select everything in the graphics area: Click Edit > Select All, or press Ctrl+A. To limit the selection to specific entities in a part, pre-select one or more entities in the graphics area. For example, pre-select an edge and a vertex to limit the selection to all edges and vertices.
