Solidworks

how to extrude cut in solidworks ?

Contents

Why can’t I extrude cut in SolidWorks?

Most times it’s a tiny tiny gap in the shape that won’t let you cut since the profile is not complete. Another option is to just try cut extrude as a “thin feature” though this will not give you the result you want you should be able to see if any gaps exist.

How do you cut out in SolidWorks?

Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies. Examine the preview. If necessary, click Flip cut to reverse the direction of the cut.

Can we extrude the sketch in both direction yes or no?

To extrude in both directions from the sketch plane in the PropertyManager, under Direction 1, select Through All – Both Directions. To extrude as a thin feature, set the PropertyManager options in Thin Feature.

Why is extrude cut greyed out?

It is greyed out because, as you have described it, you have bodies and not surfaces. TL;DR (more info below): You need to convert the solid body to a surface to use the Trim Surface. Or you need to use something like an Extruded Cut if you are only working with bodies. Or you need to use surfaces from the beginning.

Can you extrude an open sketch in Solidworks?

Click Extrude (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Extrude, and click in the graphics area to establish the direction of the extrusion. The Base-Extrude PropertyManager appears.

INTERESTING:   how to project a sketch onto another plane in solidworks ?

Can we exclude the sketch in both directions?

Yes, using extruded direction selection in the box under the end condition drop down.

What is an offset cut?

In the most basic of definitions, blade offset is the distance from the tip of the blade to the center of its shaft. It’s also a measurement of the blade’s effective cutting width. … If blade offset is set too low, corners will be rounded. If blade offset is set too high, your corners will bulge outwards.

What is extrusion direction?

The extrusion direction is the normal vector of the plane that contains the. entity. In the case of a line entity, it’s the direction that thickness. will be applied to the line.

How do I delete a feature without deleting the sketch in SolidWorks?

In SolidWorks 2014 version you have the option to delete the Parent feature without deleting the child features. The last option is to select the Advanced Confirm Delete dialog box and as shown below, it lets you selectively delete child and absorbed features.

Where is the cavity tool in SolidWorks?

Click Cavity on the Mold Tools toolbar, or click Insert > Mold > Cavity.

What is boundary solidworks?

A boundary spans two or more profiles in one or two directions. A boundary can be a base, boss, cut, or surface. Boundaries follow the profiles specified in Direction 1 (blue) and Direction 2 (purple). The Boundary Surface feature can create surfaces that span the extents of Direction 1 and Direction 2.

What is extrude boss in Solidworks?

Figure 2: Extrude Insert. Once the Extrude menu appears on the left-hand side of your screen, it will prompt you to select a plane or sketch that will be used to create a 3D model from. The Boss-Extrude/Base feature will project a 3D model with the selected sketch or face.

INTERESTING:   How to Extrude Cut a Circle in Solidworks?

How many entities can you choose to mate with an angle mate?

Click Mate (Assembly toolbar) or Insert > Mate. In the Mate PropertyManager, for Entities to Mate , select two entities in the graphics area or the flyout FeatureManager design tree. Under Standard Mates, click Angle and set the dimension.

Can you Extrude an open contour?

For example, an Extrude with an open contour will appear as “Extrude-Thin1” in the feature tree as seen in the above image. The above image depicts the comparison between a regular Boss Extrude, Cut Extrude and Revolve with their respective thin feature counterparts.

How do you fix an open sketch in Solidworks?

To open the Repair Sketch tool: Click Tools > Sketch Tools > Repair Sketch. Repair Sketch deletes these from the sketch.

Back to top button

Adblock Detected

Please disable your ad blocker to be able to view the page content. For an independent site with free content, it's literally a matter of life and death to have ads. Thank you for your understanding! Thanks