Contents
How do you cut a hole in a surface in Solidworks?
Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies. Examine the preview. If necessary, click Flip cut to reverse the direction of the cut.
How do I fill a surface in Solidworks?
To create a filled surface, click Filled Surface on the Surfaces toolbar, or click Insert > Surface > Fill, set the PropertyManager options, and click OK .
Can we select non planar surface as sketch plane in Catia?
No, we cannot select a non-planar surface as sketch.
How do you make a dome in Solidworks 2020?
To create a dome: Click Dome on the Features toolbar, or click Insert > Features > Dome. You can create one or more dome features simultaneously on the same model.
How do you make a semicircle in Freecad?
If the Edit → Preferences… → Draft → General settings → Draft tools options → Use Part Primitives when available option is checked, the command will create a Part Circle instead of a Draft Circle.
Why is extrude cut greyed out?
It is greyed out because, as you have described it, you have bodies and not surfaces. TL;DR (more info below): You need to convert the solid body to a surface to use the Trim Surface. Or you need to use something like an Extruded Cut if you are only working with bodies. Or you need to use surfaces from the beginning.
How do you use boundary surfaces in Solidworks?
To create a boundary surface feature, click Boundary Surface (Surface toolbar) or Insert > Surface > Boundary Surface, set the PropertyManager options, then click . Curve callouts colors match those used in the PropertyManager. Click callouts to change the Tangent Type.
How do you convert an imported surface to a solid in Solidworks?
To convert a boundary surface into a solid, click Insert > Surface > Boundary Surface, and in Options and Preview, click Create solid. To convert a trim-surface feature into a solid, click Insert > Surface > Trim Surface and in Surface Split Options, click Create solid.
How do you cut Extrude in Solidworks?
Open a sketch on a face or plane, and sketch a profile of the cut. The profile can contain more than one closed contour. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve. Set the options as needed in the Cut-Extrude or Cut-Revolve PropertyManager.
How do you properly drill a hole in metal?
Use a heavier, sharp punch to re-punch the smaller mark and make a dimple. Be careful here because sometimes a punch mark will work harden the metal and will actually be harder to drill than it should be. Use a small bit to drill a pilot hole.
Is pattern is only used for creating holes in SolidWorks?
You can use sketch driven patterns for holes or other feature instances. Using X-Y coordinates, you can specify a feature pattern. Hole patterns using X-Y coordinates are a common application for table driven patterns. However, you can use other seed features, such as a boss, with table driven patterns.
What is a counterbored hole?
A counterbore (symbol: ⌴) is a cylindrical flat-bottomed hole that enlarges another coaxial hole, or the tool used to create that feature. A counterbore hole is typically used when a fastener, such as a socket head cap screw, is required to sit flush with or below the level of a workpiece’s surface.
How do I make a shell in Freecad?
Here’s one way to get a shell with no thickness: create a solid, switch to the Draft workbench and click on the downgrade tool (Draft Downgrade) to explode the solid into faces; the faces remain all selected; now click on the upgrade tool (Draft Upgrade) to upgrade them into a closed shell.
How do you hide tangent edges in SolidWorks?
Other options for tangent edge display are in the Hide/Show Edges PropertyManager. You can set the color of tangent edges in Tools > Options > System Options > Colors . In Color scheme settings, select Drawings > Model Tangent Edges and set the color.
How do I wake up Center Point in SolidWorks?
Select the top surface and use Sketch → Line. “Wake up” the center point again.
