Contents
How do you read a civil construction plan?
How do you read building plans?
How do you read a civil profile drawing?
How do you read and understand civil engineering drawings?
The name and contact information for the engineer who created the drawing. The name of the object or part, along with part numbers or other identifying information. The units of measurement used for dimensions in the drawing. The scale of the drawing.
What are the 6 types of construction drawings?
1. Plans.
2. Interior and exterior elevations.
3. Building and wall sections.
4. Interior and exterior details.
5. Schedules and room finishes.
6. Framing and utility plans.
What does FS mean in civil drawings?
FS Architecture Abbreviation3FSFull Size Construction, Civil Engineering, Construction Drawing2FSFar Side + 1 variant Construction, Engineering, Blueprint1FSFar S s ide Military, Architectural, Construction2FSFloor Sink Construction, Architectural, Technology2FSFused Switch Construction, Architectural, Technology13 autres lignes
How do you read CAD drawings?
1. Look at the legend. The legend or key, usually located near the lower right-hand corner of the drawing, should explain all of the symbols on the drawing.
2. Read the notes. Particularly near things like windows and doors, CAD drawings have lots of notes.
3. Pay attention to lines.
What are the different types of building plans?
1. Types of Building Plan Drawings.
2. Site Plan.
3. Floor Plan.
4. Cross Section.
5. Elevation. External Elevation. Internal Elevation.
6. Landscape Plans.
How do you read elevations?
To find an elevation, simply set the rod foot at any location on the job within the range of your laser. Run the detector and / or front rod section up or down until you pick up the “on grade” signal from your detector. Read the number opposite the pointer. That number is your true elevation.
How do you read a station number?
Station numbers usually increase from the beginning of the project to the end of the project. Also, stationing usually runs from South to North or from West to East. The beginning station of a project is usually arbitrary. Generally, it will be 10+00 or 100+00.
What is plan and profile?
The plan and profile sheet is a type of engineering drawing, traditionally prepared in CAD, that combines a plan view, a map that targets a linear feature such as a levee, road, or channel, with a profile view, an XY plot of the elevation of the targeted linear feature.
What is PGL in civil engineering?
PGL Stands For Profile Grade Line| Programmable Gain Low. « First. ‹ Previous. Next ›
How do you read a basic drawing?
1. Start by looking at the Title Block on each drawing.
2. Drawings generally include the front, side and top of the object being designed.
3. Parallel projections include orthographic drawings: flat, multi-view drawings of the subject.
4. The drawing of the front of the object shows dimensions of width and height.
How do you read drawing symbols?
1. The name and address of the company who produced/ owns the drawings.
2. The part number and description.
3. Mass.
4. Material.
5. General tolerances.
6. Units.
7. Finish.
8. Projection details.
What are civil engineering drawings?
A civil drawing, or site drawing, is a type of technical drawing that shows information about grading, landscaping, or other site details. … Examples of civil engineering projects are bridges, building sites, canals, dams, harbors, roadways, railroads, pipelines, public utility systems, and waterworks.