Contents
How do you read measurements on architectural drawings?
How do you read building blueprints?
1. Begin with the title block. The title block is the first piece of information you’ll see in construction site plans.
2. Study the plan legend.
3. Find the blueprint’s scale and orientation.
4. Look for notes from the architect.
How do you analyze a floor plan?
How do you read floor plan symbols?
How do you read a scale on a plan?
What are architectural drawings measured in?
For example, a floor plan of a building drawn using a metric scale of 1:100 (pronounced “one to a one hundred”), means that for each unit that is measured on the drawing (the 1), the real world size of it is 100 times larger (the 100) than it appears.
What are the 6 types of construction drawings?
1. Plans.
2. Interior and exterior elevations.
3. Building and wall sections.
4. Interior and exterior details.
5. Schedules and room finishes.
6. Framing and utility plans.
How do you read CAD drawings?
1. Look at the legend. The legend or key, usually located near the lower right-hand corner of the drawing, should explain all of the symbols on the drawing.
2. Read the notes. Particularly near things like windows and doors, CAD drawings have lots of notes.
3. Pay attention to lines.
Why is it called a blueprint?
The reaction from the sun causes a compound to appear on the paper called blue ferric ferrocyanide, or Prussian Blue. This is the blue color left behind on the treated paper and why these copied documents came to be known as blueprints.22 sept. 2020
How do you read a site plan?
1. Find The Title Block. In the bottom right corner of most plans, you’ll find what’s called a title block.
2. Learn the Plan’s Scale.
3. Determine the Orientation of the Plan.
4. Know the Datum Point.
5. Note the Site’s Contours.
6. Locate Existing Structures.
How do I find the floor plan for my house?
1. Talk to the contractor that built your house, if possible.
2. Locate the archives of the municipality or county where your house is located.
3. Locate the fire insurance maps for the community.
4. Visit your local building inspector’s office.
5. Browse through historical plan books.
How do you plan a house layout?
1. Choose an area. Determine the area to be drawn.
2. Take measurements. If the building exists, measure the walls, doors, and pertinent furniture so that the floor plan will be accurate.
3. Draw walls.
4. Add architectural features.
5. Add furniture.
What does C stand for on a floor plan?
Cooker
What does T in a circle mean on floor plans?
Electrical Symbols A small circle bisected by two parallel lines is a wall outlet, while a circle superimposed over an X is a ceiling light and a T hanging from a circle is a thermostat.
What does WO stand for on a floor plan?
Beyond that, It might be shorthand to denote a feature or indicate some reference not commonly seen in the “vernacular” of the Architectural/Building trades. Like,say—“Window Opening”, or “Wall Outlet”.