Faq

Quick answer: How to make rectangular cloud in autocad?

To create a simple revision cloud type REVCLOUD on the command line and press enter. Click at rectangular from the command line options and then click at two points in the drawing to make the rectangle. A revision cloud will be made in the drawing area as shown in the image below.

Also, how do I add a cloud shape in Autocad?

People ask also, how do I turn a line into a cloud in Autocad?

  1. Click Home tab Draw panel Revision Cloud drop-down. Find.
  2. In the drawing area, right-click and choose Object.
  3. Select a circle, ellipse, polyline, or spline that you want to convert to a revision cloud.
  4. Press Enter to keep the current direction of the arcs.
  5. Press Enter.

Quick Answer, how do you turn a polyline into a cloud? In addition to drawing new revision clouds, you can also convert existing entities — lines, arcs, circles, 2D polylines, and splines — into revision clouds. 1 Do one of the following to choose Revision Cloud ( ): On the ribbon, choose Annotate > Revision Cloud (in Markup). On the menu, choose Draw > Revision Cloud.

Amazingly, how do you scale a revision cloud in Autocad?

How do I draw a cloud in AutoCAD 2018?

  1. Click Home tab Draw panel Revision Cloud drop-down. Find.
  2. In the drawing area, right-click and choose Object.
  3. Select a circle, ellipse, polyline, or spline that you want to convert to a revision cloud.
  4. Press Enter to keep the current direction of the arcs.
  5. Press Enter.

How do I draw a cloud in AutoCAD 2020?

  1. Click Home tab Draw panel Revision Cloud drop-down. Find.
  2. In the drawing area, right-click and choose Object.
  3. Select a circle, ellipse, polyline, or spline that you want to convert to a revision cloud.
  4. Press Enter to keep the current direction of the arcs.
  5. Press Enter.

What is a revision cloud?

A revision cloud is a polyline of sequential arcs to form a cloud-shaped object. If you review or redline drawings, you can increase your productivity by using the revision cloud feature to highlight your markups.

What is spline in AutoCAD?

Creates a smooth curve that passes through or near a set of fit points, or that is defined by the vertices in a control frame. Find. SPLINE creates curves called nonuniform rational B-splines (NURBS), referred to as splines for simplicity. Splines are defined either with fit points, or with control vertices.

How do you make an octagon in CAD?

  1. Click Drafting tab > Draw panel > Rectangle drop-down > Polygon.
  2. At the Command prompt, enter the number of sides.
  3. Enter e (Edge).
  4. Specify the start point for one polygon segment.
  5. Specify the endpoint of the polygon segment.

How do you add a revision triangle in Autocad?

What are the two options for creating splines in Autocad?

A 1-degree spline results in a line; there is no bend. A 2-degree spline results in a parabola; there can be only one bend. A 3-degree spline results in a cubic Bezier curve; there can be two bends.

How do you edit a revision cloud?

  1. Click Modify | Revision Clouds tab Mode panel (Edit Sketch). Revit enters sketch mode.
  2. Select segments of the revision cloud, and drag the endpoints to adjust its boundaries.
  3. Click Modify Revision Clouds > Edit Sketch tab Mode panel (Finish Edit Mode).

What controls the revision cloud arc length?

The Arc Length value controls the arc length for all existing and new revision cloud annotations in the project. This value sets the minimum arc length for the 2-arc segment that is used to draw the revision cloud annotation.

How do you change arc length in AutoCAD?

  1. Click Home tab Draw panel Revision Cloud drop-down. Find.
  2. In the drawing area, right-click and choose Arc length.
  3. Specify a new minimum arc length.
  4. Specify a new maximum arc length.
  5. Press Enter to continue with the command or Esc to end the command.

INTERESTING:   Frequent answer: Tutoriel d'autocad?
Back to top button

Adblock Detected

Please disable your ad blocker to be able to view the page content. For an independent site with free content, it's literally a matter of life and death to have ads. Thank you for your understanding! Thanks