Quick answer: Autocad viewport scaling?

1. Click the Model tab.
2. Click a viewport to make it current.
3. Choose View > Zoom > Zoom.
4. Type the zoom scale factor relative to paper space by appending the suffix xp to the scale factor, and then press Enter.

Beside above, how do I scale a viewport to any custom scale in AutoCAD?

As many you asked, why is my viewport scale not accurate? Make sure your MEASUREMENT System Variable is set to 0 (Imperial) Make sure you are using 1″ (inch) as your unit and not 1′ (foot). (if you were then check your UNITS set to Inches) and also you will have to scale everything up a factor of 12. — Tracy W.

Likewise, how do I change the scale of a viewport line?

1. With PSLTSCALE set to 1 (default), set the current linetype to dashed, and then draw a line in a paper space layout.
2. In the layout, create a viewport with a zoom factor of 1x, make that layout viewport current, and then draw a line using the same dashed linetype.

Amazingly, what command do you use to scale a viewport? Double click within the viewport boundaries. Then, type Zoom and the Command Line. Next, enter the scale you would like to use. In this case, I’ll use 1/50.

1. Select the layout viewport that you want to modify.
2. Right-click, and then choose Properties.
3. If necessary, click Display Locked and choose No.
4. In the Properties palette, select Standard Scale, and then select a new scale from the list.

How do I change the scale for paper space in AutoCAD?

Setting the Scale in a Paper Space Viewport Select No from the Display Locked menu in the Properties panel. The viewport will be unlocked. Center your view in the viewport, and make sure it’s set to a 1:1 scale. You can then use the Scale tool to set the scale for that viewport.

How do I set scale in AutoCAD layout?

1. Select the layout viewport that you want to modify.
2. Right-click, and then choose Properties.
3. If necessary, click Display Locked and choose No.
4. In the Properties palette, select Standard Scale, and then select a new scale from the list. The scale you choose is applied to the viewport.

How do you rescale in AutoCAD?

How to scale down in AutoCAD – Window select the object(s) in AutoCAD, type SCALE, and then specify a number between 0 and 1. Hit Enter. The size of the object(s) will SCALE DOWN by that factor.

How do you find the scale factor in AutoCAD?

1. Choose your scale. For example: 1/4” = 1”
2. Invert the fraction and multiply by 12 to get: 4/1 x 12 = 48.
3. Your scale factor is 48.

How do I change the viewport linetype scale in AutoCAD?

Do one or more of the following: In the layout, double-click inside a viewport to activate it, then type PSLTSCALE and set it to either 0 or 1.

How do you scale from model space to paper space?

1. Go to Home tab > Modify panel (expanded)> Change Space to start the CHSPACE command.
2. At the prompt, select one or more objects to move.
3. Press Enter to end selection and the command. AutoCAD moves the selected objects to the other space.

How do you fix linetypes in AutoCAD?

1. Use RECOVER to open the drawing.
2. Remove the usage of the damaged linetype by changing all layers and objects to a different linetype.
3. Enter PURGE and select All.
4. Enter SAVEAS to DXF format.
5. Close and reopen the DXF file.

How do you control the zoom on a viewport in AutoCAD?

1. Zoom in. Slide thumb and index finger apart.
2. Zoom out. Pinch thumb and index finger together.
3. Pan. Swipe with two fingers in the direction that you want to pan the view.

What is Zoom scale in AutoCAD?

Scale / Scale factor. Zooms to change the magnification of a view using a scale factor. Enter a value followed by x to specify the scale relative to the current view. Enter a value followed by xp to specify the scale relative to paper space units.

How do you edit a viewport?

1. Select the viewport.
2. Select Modify > Edit Viewport.
3. Click Design Layer and select the design layer to edit from the list.
4. Choose how the design layer will display.
5. If the viewport has been cropped, select Add Reference Crop Object to display the crop on the design layer.