Quick Answer: Autocad set up viewport?

1. If necessary, click a layout tab.
2. Set the current layer to a layer that’s reserved for layout viewports (recommended).
3. Click Layout tab Layout Viewports panel Insert View.
4. Do one of the following:
5. Right click to display a list of scales and click one of them.

How do you set a viewport in AutoCAD layout?

1. Click View > Viewports > New Viewports.
2. In the Viewports dialog box, enter the new name for the viewport.
3. Select the viewports from the Standard Viewports list.
4. Click OK to create the new Viewport.

How do you activate a viewport in AutoCAD?

How do I fix the viewport in AutoCAD?

1. Right-Click. Select the Viewport. Right-click. Select Display Locked >> Yes.
2. Use the Properties Command. Select Modify >> Properties to open the Properties window. Select the Viewport. Change the Display Locked property of the viewport to Yes.

How do you set a custom viewport scale?

How do you create a viewport in model space?

Click the – or + control, and then the Viewport Configuration List to change the number and arrangement of viewports. Press CTRL while dragging viewport boundaries to display the green splitter bar and create new viewports. Alternatively, you can drag the outermost splitter controls.

What is the viewport command in AutoCAD?

The Layout Viewports command creates and controls views of your drawing from a Layout tab. You must click a Layout tab before you use the Layout Viewports command. If this is the first time using that Layout tab, your drawing disappears. This is normal. You must create at least one layout viewport to see your drawing.

How do you name a configuration of viewports?

1. In model space, click View tab Viewports panel Named. Find.
2. In the Viewports dialog box, New Viewports tab, enter a name for the viewport configuration in the New Name box.

When working in a layout of a viewport is activated and unlocked?

1. The viewport scale changes to the next available standard scale.
2. Nothing.
3. The viewport scale returns to the default 1:1 scale.

How do you lock a viewport in paper space?

From the Layout Viewports panel, select Lock from the pulldown menu item. This is the only one of the four methods that doesn’t require you to select the Viewport prior to setting it to Locked. While you can still do it that way, it will prompt you to select a Viewport if one isn’t selected.

Why is my viewport not showing?

Make sure the layer has not been turned off or frozen: In the Layer Properties Manager, make sure the layer that contains the viewport geometry is not turned off or frozen. Go to the layout tab that contains the problem viewport. From the Properties palette, select the Quick Select button on the top right.

Why is my viewport scale not accurate?

Make sure your MEASUREMENT System Variable is set to 0 (Imperial) Make sure you are using 1″ (inch) as your unit and not 1′ (foot). (if you were then check your UNITS set to Inches) and also you will have to scale everything up a factor of 12. — Tracy W.

How do you set scale in AutoCAD?

How to scale up in AutoCAD – Window select the object(s), type SCALE, and then specify a number larger than 1. Hit Enter. The size of the object(s) will SCALE UP by that scale factor.

How do you scale a paper space in AutoCAD?

To set a scale in a Paper Space viewport, click within the viewport to make it active. Select No from the Display Locked menu in the Properties panel. The viewport will be unlocked. Center your view in the viewport, and make sure it’s set to a 1:1 scale.

How do you fit model space in layout AutoCAD?

Click the layout tab for which you want to set the plot scale to Fit to Paper. In the Page Setup Manager, Page Setups area, select the page setup that you want to modify. Click Modify. In the Page Setup dialog box, Under Plot Scale, select Fit to Paper.

How do you use a viewport?

Use the viewport meta tag to improve the presentation of your web content. Typically, you use the viewport meta tag to set the width and initial scale of the viewport. For example, if your webpage is narrower than 980 pixels, then you should set the width of the viewport to fit your web content.