Contents
Why I Cannot extrude in AutoCAD?
You are correct that the outer shape too had a gap. This was discovered during the flatten process. I constructed a line segment to fill the gap and then joined all the lines. Please select the Accept as Solution button if my post solves your issue or answers your question.
What is the function of Extrude command?
The Extrude command in AutoCAD 3D is used to create a surface or solid of a 2D surface or a 3D curve. The Extrude command is widely used to create walls, shapes, etc.
Can you extrude a block in AutoCAD?
Draw the rectangle over and extrude it — or explode the block and extrude it. Don’t try to imagine capabilities for AutoCAD; use the ones it has.
What is the difference between extrude and Presspull command?
If you use the Presspull command on an existing face then a simple extrusion will be created but if you press and hold the CTRL key and then use Presspull command on the surface then the extrusion will follow the geometry along the profile of 3D solid as shown in the image below.
What is the Presspull command doing in AutoCAD?
The Presspull command in AutoCAD 3D is used to create an area formed by the closed boundary. Or. It is used to pull an enclosed boundary. It can also be used to create a 3D solid in case of the selected circle or interior of the bounded area. The objects, such as arc, can be used to create a 3D surface.
Can you extrude in Autocad LT?
You can modify a 3D solid by extruding one or more faces of the solid. This can be a very powerful way to modify solids. To extrude faces of a solid, on the Home ribbon, in the Solid Editing panel, click the Extrude Faces tool. The program prompts you to select faces.
What is explode in AutoCAD?
Explodes a compound object when you want to modify its components separately. Objects that can be exploded include blocks, polylines, and regions, among others. The color, linetype, and lineweight of any exploded object might change. Other results differ depending on the type of compound object you’re exploding.
What is Polysolid in AutoCAD?
A polysolid is sort of like an extruded, wide polyline. In fact, you can draw a polysolid the same way that you draw a polyline, using both straight and curved segments. But unlike polylines, which lose any width properties when you extrude them, polysolids retain the width of their line segments.
What is Polysolid command?
Creates 3D solid in the shape of a wall or series of walls. Find. You can create 3D walls with straight and curved segments of constant height and width. You can create a 3D solid with POLYSOLID just as you would a polyline.
Which command is used for dimensioning?
Creates multiple dimensions and types of dimensions with a single command. You can select objects or points on objects to dimension, and then click to place the dimension line. When you hover over an object, the DIM command automatically generates a preview of a suitable dimension type to use.
What is MIrror command in AutoCAD?
The MIrror command creates a reverse copy of an object in AutoCAD. After you select some objects, AutoCAD prompts you to select two points that define a line about which the objects will be mirrored.
What is loft in AutoCAD?
The loft command in AutoCAD is used to create 3D solid or surface. The 3D solid or surface is formed within the space between various cross sections. The cross-sections determine the outer shape of the solid or surface. To create a 3D object using LOFT, we are required to specify at least two cross-sections.
What is the status bar in AutoCAD?
The status bar displays the cursor location, drawing tools, and tools that affect your drawing environment. The status bar provides quick access to some of the most commonly used drawing tools. You can toggle settings such as grid, snap, polar tracking, and object snap.
What is the shortcut key for Extrude command?
What is the shortcut key for Extrude command? You can start the Presspull tool by PRES command or by using the CTRL+Shift+E key from your keyboard.
Can you extrude text in AutoCAD?
Use the Explode Text Express tool (txtexp) to reduce your text to a bunch of closed polylines. 3. EXTRUDE these plines to the desired thickness.