Contents
How do you split a line in Vectorworks?
How do you use Vectorworks split tool?
1. Click the tool and mode.
2. Click the object at the point to be split. If multiple objects are within range of the specified point, the Select Split Candidate dialog box opens. Highlight the object to split by using the Next and Prev buttons.
3. The object is split into two pieces.
How do you divide polylines into equal segments?
1. Start the DIVIDE command.
2. At the Select object to divide: prompt, chosoe the object along which you want to place the points or blocks.
3. At the Enter the number of segments or [Block]: prompt, enter the number of segments you want to create, or enter b to use the Block option.
How do you split a 3D object in Vectorworks?
Click the Project tool from the 3D Modeling tool set, and then click Split from the Tool bar. Click on the splitting object, and then click on the solid object.
How do you cut a 3D object in Vectorworks?
Click the Project tool from the 3D Modeling tool set, and then click Trim from the Tool bar. Click on the trimming object, and then click on the solid object. The cursor changes into the pointing hand cursor. Click on the side of the intersection to be trimmed away.
How do you make a semi circle in Vectorworks?
How can I divide a line in Autocad?
DIVIDE command: Select Divide tool from expanded Draw panel of Home tab, you can also use its command equivalent DIVIDE. Click on the spline and enter the number of segments in which you want to divide the spline, I will select 6 segments for our case. Press enter to exit the command.20 fév. 2020
How do you split lines in Draftsight?
Click Draw > Point > By Segments (or type MarkDivisions). In the graphics area, select the entity you want to divide by segments. Type the number of segments you want. Use a whole integer between 2 and 32767.
How do you divide a circle into a segment in Autocad?
How do you cut out a shape in Vectorworks?
1. Draw one or more 2D cutout shapes (rectangle, circle, oval, polygon, polyline, or arc) on the roof object.
2. Select the cutout object and the roof object.
3. Select the command.
4. The shapes are cut out of the roof, and the clip objects are selected.
5. Delete the clip objects.
How do you create an arc?
1. Click the Arc tool from the Basic palette, and select the Point on Arc mode.
2. Click to set the start point of the arc.
3. Click to set the end point of the arc.
4. Move the cursor until the desired arc shape and size is previewed, and then click to set the arc.
How do you draw an arc with a compass?
How do you measure an angle in Vectorworks?
1. Click the Protractor tool from the appropriate tool set/palette, and select Angle from Two Segments mode.
2. Move the selection arrow over the first side of the angle to measure.
3. Click to select the side, and then move the cursor to the other angle side.