Contents
How do you fix an open sketch in Solidworks?
To open the Repair Sketch tool: Click Tools > Sketch Tools > Repair Sketch. Repair Sketch deletes these from the sketch.
Can a open sketch be extruded in Solidworks?
Set the PropertyManager options. To extrude in both directions from the sketch plane in the PropertyManager, under Direction 1, select Through All – Both Directions. To extrude as a thin feature, set the PropertyManager options in Thin Feature.
How do I reuse a sketch in Solidworks?
If you want to reuse the original sketch in another feature, simply make the sketch visible. When editing the sketch you can add contours and use them in the existing features and add new features to the new sketch entries.
Can you extrude an open contour?
For example, an Extrude with an open contour will appear as “Extrude-Thin1” in the feature tree as seen in the above image. The above image depicts the comparison between a regular Boss Extrude, Cut Extrude and Revolve with their respective thin feature counterparts.
How do you close an open sketch in Solidworks?
Open a sketch on a model face. Sketch an open profile with endpoints that are coincident with model edges on the same face boundary. Click Tools > Sketch Tools > Close Sketch to Model . An arrow points in the direction in which the sketch will close.
Can we extrude the sketch in both direction in Ansys?
Yes, using extruded direction selection in the box under the end condition drop down.
How do you extrude a 2D sketch in Solidworks?
Click Convert to Extrusion (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Extrude, and click in the graphics area to establish the direction of the extrusion. The Base-Extrude PropertyManager appears.
Which end condition extruded boss?
The default end condition is “blind,” which means we will take our sketch and extrude it a set distance from the sketch plane. After that distance is met, extrusion will stop. So the condition for ending the extrusion is that it will proceed a set distance and then stop. Again, this is known as a “blind” end condition.
Can I copy sketches in SolidWorks?
You can copy an entire sketch and paste it on a face in the current part, or you can paste it into a different sketch, or into a part, assembly, or drawing document. … Select the closed sketch in the FeatureManager design tree. Click Edit > Copy or press Ctrl+C.
Can you save a sketch in SolidWorks?
Saving a Sketch to a Block File To save a sketch to a block file: Create a sketch. Click Save Sketch as Block (Blocks toolbar) or Tools > Blocks > Save .
How do I open a sketch in Solidworks?
In an open sketch, click Tools > Sketch Tools > Check Sketch For Feature. In the dialog box, Feature usage lists all of the ways to use the sketch in a feature: If the sketch was used to create a feature, the feature type is displayed in Feature usage.
What are open contours?
Contours can be either open or closed. A contour must be closed to obtain measurements of the area within the contour. An open contour can be used to measure the length of a curved line.
What is extruded cut solidworks?
Extruded cut feature removes material from the part. The End Condition, Draft, and Thin Feature options are same as described in Extruded Boss/Base. To create an extruded cut: 1) Sketch the profile for cut. 2) Click Extruded Cut on the Features toolbar or select Insert, Cut, Extrude on the menu bar.
Which file contains all the drawing document in Solidworks?
slddrt – Sheet Format File. . slddrt file is the file containing the drawing sheet information – the geometry and notes that helpful to the drawing’s properties. This also contains the anchors for the BOM, Revision Table, etc.
How can you easily visualize Parent Child arrows on the FeatureManager design tree?
Right-click the first item in the FeatureManager design tree. On the context toolbar, click the following: Click Dynamic Reference Visualization (Parent) to turn on parent reference arrows. Click Dynamic Reference Visualization (Child) to turn on child reference arrows.
