Contents
How do I dissolve text in Solidworks?
If you would prefer the Sketch text to not behave like a block, it can be broken down into its separate sketch entities by right clicking and choosing to “dissolve sketch text.” Dissolving the sketch text will no longer allow you to make changes to the text.
How do you extrude numbers in Solidworks?
The Extruded Cut feature can be found on the features tab in the Command Manager interface as shown in Figure 1. You can also go to the toolbar and click Insert -> Cut -> Extrude to pull up the Cut-Extrude Feature menu as well.
How do I color text in Solidworks?
To set system colors: Click Options (Standard toolbar) or Tools > Options, and select Colors.
How do you center text in Solidworks?
After you sketch a centerline you can select it with the curve selection box. You can enter text in a box below the curve selection box. Your text will appear above the line. You can then select the center align option to center the text and click the green check to confirm the change.
How much space does solidworks?
2GB free disk space; 5GB recommended. 2GB or more GPU RAM; 4GB recommended. NVIDIA® graphics card: NVIDIA Quadro®/NVIDIA GeForce®/Tesla™ with at least NVIDIA Kepler™ chip; Dual-GPU setup with at least NVIDIA Maxwell™ cards for the best experience.
How do you move text in Solidworks?
To move: Click the line or text and drag to a new location. (Annotation toolbar), or click Insert > Annotations > Note. Specify the text properties, then click to place the text in the desired location.
What is extruded text?
About beveled and extruded text and shape layers In computer graphics, an extruded object is one that appears to be three-dimensional. This 3D appearance is most apparent when moving the object, or moving a camera around the object. Bevel is the control over the edges for an extruded object.
Why are my dimensions GREY in Solidworks?
SolidWorks has many default colors for different types of dimensions. On drawings, the two main types of dimensions are inserted (driving) and non inserted (driven). … When this mode is turned on, the user gets their colors right for other lines, but dimensions appear as both black and grey.
What are layers in Solidworks?
You can create layers in a SOLIDWORKS drawing document. You assign visibility, line color, line thickness, and line style for new entities (annotations and assembly components) created on each layer. New entities are automatically added to the active layer.
How do I center in Solidworks?
In the PropertyManager, under Advanced Mates, click Profile Center . For Entities to Mate, select the edges or faces that you want to center-align. In the PropertyManager, you can optionally: Change the mate alignment by clicking Aligned or Anti-aligned .
How do you center a rectangle in Solidworks?
Click Center Rectangle from the Rectangle flyout tool or click on the Menu Bar as Tools>Sketch Entities>Center Rectangle. Click to place the center point of the rectangle in the Graphics area. Move the cursor in any direction and click to set the four edges of the rectangle. Click Ok.
How do I select a template in SOLIDWORKS?
Click Options or Tools > Options. Select Default Templates. Click the appropriate browse button (Parts, Assemblies, or Drawings). In the New SOLIDWORKS Document dialog box, select the template you prepared and click OK.
How do I set document properties in SOLIDWORKS?
With a drawing open, click Options (Standard toolbar), select the Document Properties tab, and then select Drafting Standard.
Where is the Templates tab in SOLIDWORKS?
In the SOLIDWORKS software, click Options or Tools > Options. On the System Options tab, select File Locations. In Show folders for, select Document Templates.
How do I set balloon text to custom in Solidworks?
In Document Properties under the Balloons tab, the default text for a balloon can be set to a Custom Property as well. The value for this Custom Property setting, comes from a Property List. The Property List is available from File > Properties and then selecting Edit List.