Contents
What is the use of swept boss?
Creates a sweep by moving a 2D profile along a 2D or 3D sketch path. Sets the profile (section) used to create the sweep.
What is swept boss base in Solidworks?
What is Swept Boss or Base? Solidworks Swept boss is one of the useful features which help to sweeps a closed profile through an open or closed path.
How many sketches do we need to use the features lofted boss?
Sketch your profiles. A minimum of two are required but a higher number of profiles allows you to create more complex shapes. Ideally profiles should be closed but Thin Feature Lofts can be created. The profiles should be spaced apart and this can be easily achieved by using multiple Planes.
How many sketches do we need to use the feature swept boss?
The SOLIDWORKS Sweep feature has been improving over the years; unlike Extrude the Sweep feature requires at least two sketches to be selected, namely the Profile and Path.
How do you make a lofted boss in Solidworks?
Click Lofted Boss/Base on the Features toolbar, or click Insert, Boss/Base, Loft. Click Lofted Cut on the Features toolbar, or click Insert, Cut, Loft. Click Lofted Surface on the Surfaces toolbar, or click Insert, Surface, Loft.
Can you sweep a body in Solidworks?
Under the SOLIDWORKS Cut Sweep command, there is an option which allows you to select a solid body instead of a sketch as a profile to produce the cut. The following image shows two bodies and a helix which works as the path for the sweep command. Solid Body #2 represents the cutting tool.
What is swept cut?
Solidworks swept cut is features tool, mainly used to cut a solid model or part by sweeping a completely closed profile along an open or closed path. To use swept cut, you should need a closed profile and open or closed path, which may be line, helix, and circle, rectangular or arc etc.
What does mean swept?
verb (used with object), swept, sweep·ing. to move or remove (dust, dirt, etc.) with or as if with a broom, brush, or the like. to clear or clean (a floor, room, chimney, etc.) of dirt, litter, or the like, by means of a broom or brush.
What is use of lofted boss command?
Loft Boss or base is SolidWorks Features tool (like Extrude Boss, Revolved Boss, Sweep Boss etc), which mainly helps to add materials between two or more profiles with ease.
What is lofted boss in SolidWorks?
Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. You create a loft using two or more profiles. Only the first, last, or first and last profiles can be points.
Which end condition extruded boss?
The default end condition is “blind,” which means we will take our sketch and extrude it a set distance from the sketch plane. After that distance is met, extrusion will stop. So the condition for ending the extrusion is that it will proceed a set distance and then stop. Again, this is known as a “blind” end condition.
What special piece of sketch geometry is useful but not required for a revolve feature?
What special piece of sketch geometry is useful, but not required for a revolve feature? Centerline.
What does sweep do in Solidworks?
A frequently asked question amongst clients is, “What is a sweep?” Within SOLIDWORKS, a sweep is a tool that creates a solid, a cut or a surface feature by moving a profile along a path. To create a solid, use the Swept Boss tool to move a profile along a path. The profile can contain one or more closed contours.
Where the profile and path commands are used in Solidworks?
Once your profile and sketch are defined, select the Swept Boss/Base command on the features tab as seen in Figure 2. The command window will then appear on the left side of the screen. Click on the boxes under the Profile and Path section and select your profile and path sketches as seen in Figure 3.
What is the difference between sweep and loft?
The loft tool is designed to follow a path that has differently shaped cross-sections throughout, unlike the sweep which can only handle one cross-section.