Contents
How do you fix a small gap in Solidworks?
The gap is noticed by the tool, because the gap is smaller than the number entered under Showing gaps smaller than. This issue can easily be solved by dragging one endpoint to the other one, so the points merge. This can be done inside the magnifying glass.
How do I activate a sketch image in Solidworks?
(Sketch toolbar) or click Tools > Sketch Tools > Sketch Picture. In the dialog box, browse to the picture file and click Open. When you insert a picture, the scale tool automatically displays.
How do you close contours in Solidworks?
Click Tools > Sketch Tools > Close Sketch to Model. An arrow points in the direction in which the sketch will close. (The extruded boss will either be within the sketch lines or outside of the sketch lines.) In the dialog box, select Reverse direction to close the sketch, if necessary.
How should the warning shown here be repaired?
How should the warning shown here be repaired? Select a new face or plane to replace the missing one.
What does repair sketch do in Solidworks?
Click Tools > Sketch Tools > Repair Sketch. Repair Sketch deletes these from the sketch. Repair Sketch merges these into a single entity.
How do I edit a sketch in Solidworks?
To edit the picture: Double-click the picture and edit the values in the PropertyManager. Search ‘Editing Sketch Pictures’ in the SOLIDWORKS Knowledge Base.
Can you trace a picture in Solidworks?
(Sketch toolbar) or click Tools > Sketch Tools > Sketch Picture. … Select a tool for Image Type. Select a tool for Selection tools, and create a border around the image you want to trace. Click Begin trace.
Can a open sketch be extruded in Solidworks?
Set the PropertyManager options. To extrude in both directions from the sketch plane in the PropertyManager, under Direction 1, select Through All – Both Directions. To extrude as a thin feature, set the PropertyManager options in Thin Feature.
What is a closed sketch in Solidworks?
Closes a sketch with an open profile, using existing model edges. To use an open profile sketch to extrude using existing model edges: Open a sketch on a model face. Sketch an open profile with endpoints that are coincident with model edges on the same face boundary.
How do you hide a sketch relationship in Solidworks?
How do I toggle the display of sketch relations? (View toolbar) or View > Hide/Show > Sketch Relations to toggle the display of sketch relations. If you clear View > Hide/Show > Sketch Relations , but you select a sketch entity in an open sketch, the sketch relation icons appear.
When you select multiple edges to chamfer a flag is displayed?
True or False: A Chamfer can be applied to an edge, face, or vertex. When you select multiple edges to Chamfer, a flag is displayed on each edge and each one can be given individual Chamfer dimensions.
What special piece of sketch geometry is useful but not required for a revolve feature?
What special piece of sketch geometry is useful, but not required for a revolve feature? Centerline.
How many entities can you choose to mate with an angle mate?
Click Mate (Assembly toolbar) or Insert > Mate. In the Mate PropertyManager, for Entities to Mate , select two entities in the graphics area or the flyout FeatureManager design tree. Under Standard Mates, click Angle and set the dimension.
How do you add a derived sketch in Solidworks?
Select the sketch from which you want to derive a new sketch. Hold the Ctrl key and click the face on which you want to place the new sketch. Click Insert > Derived Sketch. The sketch appears on the plane of the selected face, and the status line indicates that you are editing the sketch.
How do you rebuild in Solidworks?
To rebuild the model: Click Rebuild (Standard toolbar) or Edit > Rebuild, or press Ctrl + B. Rebuilds only the features that changed since the last rebuild. To rebuild all features, press Ctrl + Q.
