Contents
Why is surface flatten greyed out?
The reason for the “Flatten” icon being greyed out was because the sheet metal part had a “Flat Pattern” annotation view and this annotation view was active. By selecting another annotation view, the “Flatten” icon then becomes available again.
How do you flatten the end of a tube?
For Tube Flattening, the punch press operation is a cost-effective way to produce a flat tube end for tubular assemblies. Using a dedicated die set, this process combines three separate operations, flattening the end of the tube, trimming the end corners, and piercing a hole pattern for fastening the tube.
Is ExactFlat free?
ExactFlat Online has a 30 Day trial with FREE downloads of the 2D flat pattern (DXF format). Additional downloads are available via annual subscription, monthly subscription or pay-per-download pricing.
Does solidworks have sheet metal?
It’s Not Just a Metal thing! Within SOLIDWORKS there is a tool tab called ‘Sheet Metal’ that allows you to design from scratch or convert a 3D part to sheet metal and flatten your design for manufacturing.
What is flattening test for pipe?
Flattening test is to test the ultimate plastic deformation ability of seamless steel pipes under the given conditions and crush deformation without crack defects. The principle is to apply the length of the seamless steel pipe to the specified length of the end of the sample or seamless steel pipes.
How do you straighten aluminum without breaking it?
Its a cast alum, almost all cast alum is a softer alloy (6061, 7074 etc) the best way to try and straighten it is to apply heat on the top side of the bend. Bend slowly and heat slowly. don’t over heat cause it will crack.
How do you fix a bent metal?
Heat the bent metal until it turns a dull red. Move the torch across the buckled area keeping the metal hot. Now with a smooth-face hammer (any style, 20-24 oz is best) begin tapping the bent metal back into shape. Start with light blows until you get a sense of how the metal is reacting to the hammer strikes.
How do you straighten metal with heat?
To complete heat straightening, the welder should apply measured heat to the metal steadily and allow it to enlarge and contract. The heating effect will guide you to adjust the position and heat amount applied to enhance the process.
How do you straighten a bent bar?
A press, log splitter, and/or groove in a stump all could work to straighten a bar. Putting the bar in a groove in a stump/tree and stand on it. Remember that the bar was probably bent by one guy leaning on it, or possibly a tree going over on it. Go slow, find the bend, and get it done.
How much does ExactFlat cost?
$6999 ExactFlat 3D to 2D flattening software. $999 Rhino3D 3D CAD software. $500 2 hours ExactFlat training. $18,188 Total bundle price.
How much is exact flat?
You get a $19,980 value for $9,995 USD. (50% off) ExactFlat is fully featured and affordable 3D to 2D digital patterning software. Use it to create accurate 2D flat patterns from any 3D design in minutes.
Is PhotoView 360 free?
PhotoView 360 is described as ‘is the new visualization and rendering solution from Solidworks. … Other great apps like PhotoView 360 are Keyshot (Paid), V-Ray (Paid), RenderMan (Free Personal) and Sunflow Rendering System (Free, Open Source).
What is a mountain fold in origami?
If you’ve ever folded any origami, then you’ve folded valley and mountain folds whether you know it or not. They are the simplest of origami folds. For a mountain fold, the crease is at the top and the paper is folded “behind” itself. … Generally a dash-dot line “- .
What is K-factor in sheet metal solidworks?
K-Factor is a ratio that represents the location of the neutral sheet with respect to the thickness of the sheet metal part. When you select K-Factor as the bend allowance, you can specify a K-Factor bend table. The SolidWorks application also comes with a K-Factor bend table in Microsoft Excel format.
What is the K-factor in sheet metal?
In sheet metal, the K-factor is the ratio of the neutral axis to the material thickness. When a piece of metal is being formed, the inner portion of the bend compresses while the outer portion expands (see Figure 1).
