Contents
How do I Undefine a line in SolidWorks?
There are two ways to delete relations within SolidWorks; within the properties manager or on the line itself. Select either the relation box on the sketch or the existing relations name on the properties tab and hit the delete key to delete the relation.
How do you delete a note in SolidWorks?
To delete a notes area: In the FeatureManager design tree, in the Annotations folder, right-click a Note area and click Delete.
Why are my lines Blue solidworks?
When attempting to fully define a sketch in SOLIDWORKS, users often struggle to find those final missing dimensions or geometric relations. … However, if a segment of a sketch appears blue, indicating the segment is under-defined, it can’t be moved.
How do I delete lines in Ansys?
To delete a bounded line Click Trim Away in the Sketch group or press T. Mouse over a line to preview the section that will be deleted. Click to delete the highlighted line section.
How do you delete surfaces?
In Toolspace, on the Prospector tab, expand the Surfaces collection, right-click the surface, and click Delete. The surface is erased from the drawing and removed from the Surfaces collection in the Prospector tree.
Can you open STL in Solidworks?
You can set import options when you import . stl, . wrl, or . 3mf files as SOLIDWORKS documents.
How do you convert solid mesh to Solidworks?
Because the feature only creates surfaces, the recommended workflow is to trim the surfaces to form a solid. To create a surface from mesh feature: In Tools > Options > Import, under File Format, select STL/OBJ/OFF/PLY/PLY2 and click Import as Graphics Body. Then click OK.
How do you delete a dimension in Solidworks?
To remove a dimension from a drawing: Select a dimension and press Delete. Be careful not to delete any dimension that has a reference, such as one used in a note. Search ‘Deleting Dimensions’ in the SOLIDWORKS Knowledge Base.
Why is my Solidworks drawing under defined?
In this tech tip we’ll answer the common question: Why is my SOLIDWORKS Sketch Pattern Under Defined? The reason is because the sketch instances can rotate. You could previously Fully Define the instances by adding a Horizontal or Vertical relation on one of the construction lines tied to the instances.
What does the F mean in Solidworks?
(f) Fixed. (?) Not solved. The absence of a prefix indicates that the component’s position is fully defined.
What does it mean if something is Overdefined in Solidworks?
Potential Reasons for These Error Messages Dimensions or relations are in conflict or are redundant. When you insert dimensions, they are assumed to be driving dimensions. To have two dimensions driving the same geometry is invalid. … Over defined dimensions display in yellow.
What is rollback in SolidWorks?
You can use the FeatureManager rollback bar or shortcut menu to temporarily roll back to an earlier state, to absorbed features, roll forward, roll to previous, or roll to the end of the FeatureManager design tree. You can add new features or edit existing features while the model is in the rolled-back state.
When creating sketches small boxes show up next to the sketch lines What are these boxes called?
This small box called PARAMETRIC indicator, you can get him away by delete all constrains .
Can you undo in Ansys?
It records all actions during the current session, so if you apply a command and wish to return to the state BEFORE the command was issued click on the session editor, remove the commands you wish to undo and press ok. When you press ok ANSYS will then read the session file back in (without the command you removed).
How do I remove mesh in Ansys Apdl?
First right click your mesh in the project tree and then click “Clear Generated Data”. Then, right click, say your “Node Move”, there should be a “Delete”, click “Delete”, then right click your “Mesh Edit” and there should also be a “Delete”, click that.
