Contents
How do I unhide in Solidworks?
If the component is hidden, you can show it again by right-clicking the component in the FeatureManager design tree (not in the drawing view) and selecting Show/Hide > Show Component.
Hidden lines are used to show surfaces that are not directly visible. All surfaces must be shown in all views. If an edge or surface is blocked from view by another feature, it is drawn using a hidden line. Figures 4-11 and 4-12 show objects that require hidden lines in their orthographic views.
Right-click on the blank graphics area and select “Show Hidden Components.” SOLIDWORKS will display any components hidden in the assembly. If you click on the component, it will show it when you exit this state (which can be done by clicking Escape on your keyboard or clicking “Exit Show-Hidden”).
Why is my Solidworks model invisible?
You probably can see a ghost outline of the model by moving your mouse pointer over the features, however, the model itself is missing. This problem usually occurs when a solid body that contain the model has a hidden display setting. Only a Ghost of the Model Is Present in Graphic Area.
Hidden details are shown by a series of dashes making up a broken line. It is normal practice that you place a dash at the beginning of the hidden line and another at the end where it meets an intersecting line.
Answer: dashes- It is standard practice to use dashes to represent any line of an object that is hidden from view.
How do I see all suppressed parts in Solidworks?
If you right-click on the component and choose ‘Configure Component’ you can see a table of all configurations showing the suppress state.
How do you Unsuppress all components in Solidworks?
Click Unsuppress on the Features toolbar. (In parts with multiple configurations, applies to only the current configuration.) Click Edit > Unsuppress, then select This Configuration, All Configurations, or Selected Configurations.
How do you hide multiple parts in Solidworks?
Right-click the drawing view and select Properties. Select the Hide/Show Components tab. Select a component from either the drawing view or the FeatureManager design tree to add it to the list of items to be hidden. Click Apply to see the effect of your selection.
How do you hide in Solidworks?
To show or hide a component from the shortcut menu: Right-click a component in the drawing view or in the FeatureManager design tree and select Show/Hide > Hide Component.
How do you show appearances in Solidworks?
In the Display Pane, click in the Appearances column for the component and select Appearance. Select a component in the FeatureManager design tree or in the graphics area and click Edit > Appearance > Appearance.
What does Ctrl Q Do in Solidworks?
Forced Rebuild (Ctrl+Q) This Forced Rebuild will also rebuild any views on a drawing which have sketch entities or require rebuilding. Often a Ctrl+Q can fix some issues which are persist through the standard rebuild.
In what ways can you create a standard 3 view?
The Standard 3 View option under Insert > Drawing View creates three related default orthographic (front, right, left, top, bottom, and back) views of a part or assembly displayed at the same time. The view orientations used are based on the orientations (Front, Right, and Top) in the part or assembly.
What methods can you use to switch to an isometric view?
To switch between isometric snap grids: Make sure that snap mode is on and the snap style is set to Isometric. Type IsometricGrid at the command prompt or press F5.
What is the first view inserted into an assembly drawing by default?
A general view is usually the first view placed on a sheet. It is the most versatile view in that it can be scaled or rotated to any setting. 1. Open a drawing.