Contents
What is needed to revolve a feature?
About the Revolve Feature. A revolved section requires an axis of revolution that can be created either with the section or defined by selecting model geometry. Legacy revolved features that were defined using the Constant angle option are automatically converted to Variable.
How do you use revolve cut in Solidworks?
Open a sketch on a face or plane, and sketch a profile of the cut. The profile can contain more than one closed contour. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve. Set the options as needed in the Extrude or Revolve PropertyManager.
Where is axis of revolution in Solidworks?
Click Axis on the Reference Geometry toolbar, or click Insert > Reference Geometry > Axis. Select the axis type in the Axis PropertyManager, then select the required entities for that type. Verify that the items listed in Reference Entities correspond to your selections.
What is revolved boss in SolidWorks?
To create a revolve feature: Create a sketch that contains one or more profiles and a centerline, line, or edge to use as the axis around which the feature revolves. Click one of the following revolve tools: Revolved Boss/Base (Features toolbar) or Insert > Boss/Base > Revolve.
What are the two components necessary for creating a revolve feature?
There are two ways to created revolved features: from a sketch profile or from a primitive. The primitive shape creation commands create full revolutions only. They do not create surfaces or partial revolutions.
What is an example of revolve?
Revolve is defined as to think about something, or cause to move in a circle. An example of revolve is thinking about work while trying to go to sleep. An example of revolve is spinning a toy top. An example of revolve is a ballet dancer doing a pirouette.
What is use of revolve features?
A revolved feature is an axisymmetric shape that is created by revolving an open or closed section view by a specified angle around a central axis. The section can represent a protrusion or a cut, that is, it can either add material or take it away. We are going to create the part shown in Figure 1.
What is revolve boss?
Revolves add or remove material by revolving one or more profiles around a centerline. You can create revolved boss/bases, revolved cuts, or revolved surfaces. The revolve feature can be a solid, a thin feature, or a surface.
How do you use the Hole Wizard in SolidWorks?
You can use the Hole Wizard to create customized holes of various types. To create hole wizard holes, create a part and select a surface, click Hole Wizard (Features toolbar) or Insert > Features > Hole > Wizard, set the PropertyManager options, and click .
How do you make a revolve cut?
To Create a Revolved Cut. The sketched section for a revolved cut must be closed. A revolved feature must contain an axis of revolution. Create an axis of revolution either by sketching a centerline with the revolved section, or by selecting existing linear geometry.
What is the use of guide curve in Loft feature?
A guide curve defines the path that the loft takes as it interpolates between the loft profiles. This parameter acts very similar to the “Path” sketch available when creating a Sweep feature in SolidWorks. This guide curve can be a single sketch or several different sketches can be used to define multiple guide curves.
What is swept boss base in Solidworks?
What is Swept Boss or Base? Solidworks Swept boss is one of the useful features which help to sweeps a closed profile through an open or closed path.
How do you cut Extrude in Solidworks?
To create an extruded cut: 1) Sketch the profile for cut. 2) Click Extruded Cut on the Features toolbar or select Insert, Cut, Extrude on the menu bar. 3) Under Direction 1, do the following: · Select an End Condition. Examine the preview and if necessary, click Reverse Direction to extrude in the opposite direction.
What is revolve command?
The Revolve command in AutoCAD 3D is used to create a 3D solid or surface by sweeping the object through its axis at a predefined angle.
What is difference between rotate and revolve?
Revolve is when something moves around something else. Rotate is when something moves around self. Like, Earth revolves around Sun. Earth rotates around self.