Contents
How do you revolve a sketch in Solidworks?
Create a sketch that contains one or more profiles and a centerline, line, or edge to use as the axis around which the feature revolves. Click one of the following revolve tools: Revolved Boss/Base (Features toolbar) or Insert > Boss/Base > Revolve. Revolved Cut (Features toolbar) or Insert > Cut > Revolve.
What is needed to revolve a feature?
About the Revolve Feature. A revolved section requires an axis of revolution that can be created either with the section or defined by selecting model geometry. Legacy revolved features that were defined using the Constant angle option are automatically converted to Variable.
What is revolve command in SolidWorks?
To create a revolve feature: Create a sketch that contains one or more profiles and a centerline, line, or edge to use as the axis around which the feature revolves. Click one of the following revolve tools: Revolved Boss/Base (Features toolbar) or Insert > Boss/Base > Revolve.
What is revolve boss?
Revolves add or remove material by revolving one or more profiles around a centerline. You can create revolved boss/bases, revolved cuts, or revolved surfaces. The revolve feature can be a solid, a thin feature, or a surface.
What is revolved boss in SolidWorks?
To create a revolve feature: Create a sketch that contains one or more profiles and a centerline, line, or edge to use as the axis around which the feature revolves. Click one of the following revolve tools: Revolved Boss/Base (Features toolbar) or Insert > Boss/Base > Revolve.
What are the two components necessary for creating a revolve feature?
There are two ways to created revolved features: from a sketch profile or from a primitive. The primitive shape creation commands create full revolutions only. They do not create surfaces or partial revolutions.
How do you extrude a 3D sketch boss?
You can also go to the toolbar and click Insert -> Boss/Base -> Extrude to pull up the Boss-Extrude Feature menu as well. Once the Extrude menu appears on the left-hand side of your screen, it will prompt you to select a plane or sketch that will be used to create a 3D model from.
What is an example of revolve?
Revolve is defined as to think about something, or cause to move in a circle. An example of revolve is thinking about work while trying to go to sleep. An example of revolve is spinning a toy top. An example of revolve is a ballet dancer doing a pirouette.
What is revolve tool?
ℹ️ This tool is available to all users. You can create solids such as sphere, cylinders, and cones by revolving faces or closed sketches with the Revolve tool. Not only that, but you can also create helical objects by adding height to your revolved sketch or face.
How do you use the Hole Wizard in Solidworks?
You can use the Hole Wizard to create customized holes of various types. To create hole wizard holes, create a part and select a surface, click Hole Wizard (Features toolbar) or Insert > Features > Hole > Wizard, set the PropertyManager options, and click .
What is swept boss base in SolidWorks?
What is Swept Boss or Base? Solidworks Swept boss is one of the useful features which help to sweeps a closed profile through an open or closed path.
What is revolved boss base?
Revolved Boss or Base is a SolidWorks feature tool which is used to create solid 3D model around an axis. You can revolve the sketch around an axis to add materials to it.
How do you extrude in Solidworks?
Click Convert to Extrusion (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Extrude, and click in the graphics area to establish the direction of the extrusion. The Base-Extrude PropertyManager appears. Edit the properties in the Base Extrude PropertyManager.
What is revolve in 3D modeling?
REVOLVE ignores the width of a polyline and revolves from the center of the path of the polyline. The right-hand rule determines the positive direction of rotation. The following prompts are displayed. Objects to Revolve. Specifies the objects to be revolved about an axis.
Can you sweep a body in Solidworks?
Under the SOLIDWORKS Cut Sweep command, there is an option which allows you to select a solid body instead of a sketch as a profile to produce the cut. The following image shows two bodies and a helix which works as the path for the sweep command. Solid Body #2 represents the cutting tool.
