Contents
How do you write the point of intersection?
Point of intersection means the point at which two lines intersect. These two lines are represented by the equation a1x + b1y + c1= 0 and a2x + b2y + c2 = 0, respectively.
How do you make a foreshortened dimension in SolidWorks?
To set a document-level default for the foreshortened style, with a drawing open, click Tools > Options > Document Properties > Dimensions > Linear and under Foreshortened, select a style. You can also specify to automatically foreshorten a linear dimension when the geometry of one end is outside the drawing view.
What is quick snap SolidWorks?
Quick Snaps are instantaneous, single operation Sketch Snaps. Sketching any sketch entity (such as a line) from start to finish is a single operation. Selecting a particular Quick Snaps filters out other Sketch Snaps, enabling you to focus on a particular capability.
What is a virtual sharp?
A virtual sharp creates a sketch point at the virtual intersection point of two sketch entities. Dimensions and relations to the virtual intersection point are retained even if the actual intersection no longer exists, such as when a corner is removed by a fillet or chamfer.
What is the formula for no solution?
Case 2. If (a1/a2) = (b1/b2) ≠ (c1/c2), then there will be no solution. This type of equation is called an inconsistent pair of linear equations.
What is point of intersection?
In mathematics, we refer to the point of intersection where a point meets two lines or curves. The intersection of lines may be an empty set, a point, or a line in Euclidean geometry. A required criterion for two lines to intersect is that they should be in the same plane and are not skew lines.
What is theoretical sharp corner?
Theoretical Sharp Corner. TSC= tangent point where two angled lines meet that typically have a radius connecting the lines. TSC was used on engineering and shop drawings prior to ANSI Y14.5 that implies all linear dimensions of this type are taken from the TSC not the end points of the filleted lines.
Can you dimension on a section view?
Dimensioning the interior features would require dimensioning to hidden lines which is poor practiced. The problem is eliminated by creating a sectional view which shows the interior details. Once this view has been created, you can dimension the interior details in the sectional view to complete the drawing.
Can you dimension a detail view?
Once the dimension is imported into the Section View, expand the Detail View circle to see the entire diameter, then hold Shift and drag the dimension to the Detail View. With this dimension moved, you can resize the Detail View circle and the dimension will automatically be foreshortened.
What is rebuilding in Solidworks?
Rebuilds the model with changes. To rebuild the model: Click Rebuild (Standard toolbar) or Edit > Rebuild, or press Ctrl + B. Rebuilds only the features that changed since the last rebuild. To rebuild all features, press Ctrl + Q.
Is 0 0 no solution or infinitely many solutions?
For an answer to have an infinite solution, the two equations when you solve will equal 0=0 . Here is a problem that has an infinite number of solutions. If you solve this your answer would be 0=0 this means the problem has an infinite number of solutions.
How do you know if two equations have no solution?
A system has no solutions if the lines are parallel. When solving the system, if you get a false statement (a number equal to a different number) this means there are no solutions.
At what condition is the pair of equations Ax 2y 7 and 3x by 16?
The pair of equations ax + 2y = 7 and 3x + by = 16 represent parallel lines if. a = b. 3a = 2b.
What do you call the intersection of two lines?
When two or more lines cross each other in a plane, they are called intersecting lines. The intersecting lines share a common point, which exists on all the intersecting lines, and is called the point of intersection.
What is the intersection of two planes called?
The intersection of two planes is called a line.
