Contents
How do you cut an angle Extrude in SolidWorks?
RE: Extrude cut @ an angle ??? When you make the extrude-cut click on the second option (the one with the arrow at 45°) in the dialogue section to highlight it, then select the 14° line you made in the side sketch. Click enter or the green check mark & you should have your extruded cut following the line.
How do you cut in SolidWorks?
Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies. Examine the preview. If necessary, click Flip cut to reverse the direction of the cut.
Can you extrude a line in Solidworks?
Select the sketch entities required for the feature. It is not necessary to select a complete sketch. … Click Extrude (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Extrude, and click in the graphics area to establish the direction of the extrusion.
Why can’t I extrude cut in Solidworks?
Most times it’s a tiny tiny gap in the shape that won’t let you cut since the profile is not complete. Another option is to just try cut extrude as a “thin feature” though this will not give you the result you want you should be able to see if any gaps exist.
Can we extrude the sketch in both direction yes or no?
To extrude in both directions from the sketch plane in the PropertyManager, under Direction 1, select Through All – Both Directions. To extrude as a thin feature, set the PropertyManager options in Thin Feature.
How do you make an angled plane in Solid Edge?
Angled Plane: You can create a plane inclined with some face or plane by this option. You have to select the face and edge to define the angle. Coincident Plane by Axis: This is similar to the “Coincident plane” but you can orient the resultant plane here. Plane Normal to a Curve: You need to have a curve first.
How do you find the tangent plane to a surface?
When you click on a non planar face using the reference geometry>plane option, you can create a tangent plane. This tangent plane will be placed arbitrarily until a second reference is selected. By using a sketch point, these planes can be easily positioned in the desired orientation.
How do you add a boss in Solidworks?
The mounting boss feature can be found under Insert> Fastening feature > Mounting Boss. The mounting boss command requires a face or 3D point on which to locate the geometry on. The procedure which I have found helpful is to select a face in the general position that you want the boss to go.
How do you make lips in Solidworks?
To open the Lip/Groove PropertyManager: Create a lip or groove fastening feature by clicking Lip/Groove (Fastening Features toolbar) or Insert > Fastening Feature > Lip/Groove.
How do you use a 3 point arc slot?
In a sketch, click 3 Point Arc Slot (Sketch toolbar) or Tools > Sketch Entities > 3 Point Arc Slot . Click to specify the starting point of the arc. Move the pointer to specify the ending point of the arc and then click. Move the pointer to specify the third point for the arc and then click.
How do you show slot dimensions in drawing?
The first slot dimensioning method (a) provides the width and the distance between the end radii center points. The second method (b) is the easiest and simplest to dimension. Simply state width and overall length, and use an arrow to point to the slot’s object line.
How do you make multiple planes in SOLIDWORKS?
Adding planes to SOLIDWORKS is achieved using the Plane Wizard. The Plane Wizard can be accessed via Features > Reference Geometry > Plane on the command manager, or via Insert > Reference Geometry > Plane from the drop down menu. Up to three references can be selected in order to define a new plane.
When you select multiple edges to chamfer a flag is displayed?
True or False: A Chamfer can be applied to an edge, face, or vertex. When you select multiple edges to Chamfer, a flag is displayed on each edge and each one can be given individual Chamfer dimensions.
How many entities can you choose to mate with an angle mate?
Click Mate (Assembly toolbar) or Insert > Mate. In the Mate PropertyManager, for Entities to Mate , select two entities in the graphics area or the flyout FeatureManager design tree. Under Standard Mates, click Angle and set the dimension.
What is the command to view all reference planes SolidWorks?
To show all three planes in the graphics area: Activate View Planes by doing one of the following: Click View > Hide/Show > Planes.
