Solidworks

how to make a circle tangent to a line in solidworks ?

Contents

What does it mean when a circle is tangent to a line?

A tangent to a circle is a straight line which touches the circle at only one point. This point is called the point of tangency. The tangent to a circle is perpendicular to the radius at the point of tangency.

How do you hide a tangent line in Solidworks?

yeah this is something that other programs do very well, but solidworks for some reason has a difficult time with. the only other thing i would suggest would be if you right click on a drawing view, you can go to “tangent edge” and select “hide ends”. this will draw the tangent lines, but clip the edges off.

How many ways can an arc be tangent to one line?

Two non-parallel lines can have only one tangent on each line using an arc of a specific radii. If there is a specific arc size, there can be as many as two ways the arc can be tangent to the line. Finally, an arc of a specific radii can be tangent to two other arcs in two places on each arc.

What is a tangential arc?

: a halo that touches a circular halo.

How do you draw an arc tangent to two straight lines?

equal to AB, tangent to CD and EF. Draw GH parallel to CD and at a distance from CD equal to the given radius of the arc. Draw IJ parallel to EF and also at a distance equal to the given radius of the arc.

How can you recognize a tangent of a circle?

A line is tangent to a circle if it touches it at one and only one point. If a line is tangent to a circle, then it is perpendicular to the radius drawn to the point of tangency.

INTERESTING:   SOLIDWORKS MBD - 10 Dos and Don'ts - Motivate All Stakeholders

What you mean by tangent to a circle draw a diagram?

A line that contacts an arc or circle at only one point. … The blue line in the figure above is called the “tangent to the circle c”. Another way of saying it is that the blue line is “tangential” to the circle c. (Pronounced “tan-gen-shull”). The line barely touches the circle at a single point.

What is required for a tangent arc?

When an arc is tangent to a circle, its center must be the radius distance away from that circle.

How do you hide a tangent line?

To change this on your system, go to Tools > Options, then under the System Options tab, select Display/Selection from the list on the left, then in the “Part/Assembly tangent edge display” choose “As Phantom.” Other options include “As visible” (the default setting) or “Removed” (see below).

What are tangent lines solidworks?

Tangent edges are transition edges between rounded or filleted faces in drawing views in Hidden Lines Removed or Hidden Lines Visible display modes. … Tangent edges are often visible in pictorial (isometric, trimetric, and dimetric) views, but are removed in orthographic (such as front, right, and top) views.

How do you hide hidden lines in Solidworks?

Right-click a feature or component in the drawing view or in the FeatureManager design tree and select Show/Hide, Show Hidden Edges. If the hidden edges are visible, you can hide them again by right-clicking the feature or component and selecting Show/Hide, Hide Hidden Edges.

Where is shaded with edges in Solidworks?

To display a model in Shaded With Edges view, do one of the following: Click Display Style > Shaded With Edges (Heads-up View toolbar). Click Shaded With Edges (View toolbar). Click View > Display > Shaded With Edges.

INTERESTING:   Three solutions to move faster from concept to market

Which is easier creating an enlarged detail by hand or using a CAD system?

Enlarged details are nearly always easier to draw using a CAD system.

What font provides the shape of standard engineering lettering?

Engineering drawings use a Gothic sans-serif script, formed by a series of short strokes. Lower case letters are rare in most drawings of machines.

How do you make an arc on shape?

To create an arc, first select the three point arc tool. Then click in the first location to set your start point. Click in the second location to determine your second point, the end point to the arc, and then click in another location to set the radius. You’ll notice that the radius dimension box opens.

Back to top button

Adblock Detected

Please disable your ad blocker to be able to view the page content. For an independent site with free content, it's literally a matter of life and death to have ads. Thank you for your understanding! Thanks