Contents
How do you bend dimensions in Solidworks?
Right-click a dimension extension line and select Display Options > Jog. Horizontally or vertically drag a point on the dimension extension line to create a bend.
How do you show a bend note?
Simply right click on the Flat Pattern feature in the Feature Manager Tree and select “Insert Bend Notes”. There will be a notification about the derived configuration: Clicking OK will show this: The derived configuration is the same as when a drawing view is created.
What is a bend line?
A Bending Line is a drawn PCB object that defines how a flexible board should be bent. Bending Lines can be placed across a Board Region that has been assigned a Layer Stack with the Flex option enabled – i.e. the particular board region has been configured as flexible.
Can you bend parts in Solidworks?
The sheet metal features appear in the FeatureManager design tree. To bend the sheet metal part, sketch lines on the part as shown. , or Insert > Sheet Metal > Sketched Bend . The part bends at the sketched lines.
What is bend allowance formula?
This bend allowance formula is used to determine the flat pattern length when a bend is dimensioned from 1) the center of the radius, 2) a tangent point of the radius (B) or 3) the outside tangent point of the radius on an acute angle bend (C).
What is the bend line equal to?
Sight line—also called the bend or brake line, it is the layout line on the metal being formed that is set even with the nose of the brake and serves as a guide in bending the work. Flat—that portion of a part that is not included in the bend. It is equal to the base measurement (MLD) minus the setback.
How do you find the bend radius?
If you drew your arc from the inside of your bend, add 1/2 the tube outer diameter to get your true center-line radius. If you drew your arc from the outside (top) of your bend, subtract 1/2 of the tube outer diameter to get your true center-line radius.
How do I stretch a part in Solidworks?
In the PropertyManager, under Entities to Stretch, select sketch entities for Sketch item or annotations. and then click on the sketch to set a base point. Drag to stretch the sketch entities. When you release, the entities stretch to that point and the PropertyManager closes.
Where is the Flex tool in Solidworks?
To create Flex features, click Flex (Features toolbar) or Insert > Features > Flex, set the PropertyManager options, and click .
How do you edit a table bend in SolidWorks?
You can edit a bend table in a separate Excel window. Click Edit > Bend Table > Edit Table in New Window. After editing the table, save the table, then re-insert it into the part for the changes to take effect.
What do the flat pattern display options allow us to do when creating a drawing view?
Options for Drawings. Lets you select colors for entities in flat patterns. You can select colors for: Bend Lines – Up Direction.
How do I set document properties in SOLIDWORKS?
With a drawing open, click Options (Standard toolbar), select the Document Properties tab, and then select Drafting Standard.
Where are SOLIDWORKS templates saved?
This is typically “C:Documents and SettingsAll UsersApplication DataSolidWorksSolidWorkstemplates”. You can then change the save location to a custom location, such as “C:SolidWorks Templates”. After saving the template, you must modify the SolidWorks options to actually reference the new template location.
What is flat pattern in Solidworks?
Creating Sheet Metal Flat Pattern Configurations You can create a configuration in a sheet metal part that shows the flattened part. To ensure that all features are shown in a flat pattern, you should create the flat pattern configuration after the entire design pattern of the part is complete.
What is the formula for setback?
Setback (SB)—the distance the jaws of a brake must be setback from the mold line to form a bend. In a 90° bend, SB = R + T (radius of the bend plus thickness of the metal).