Contents
Can you loft to a line?
As to the solid loft, all the profiles should be closed and the sketch point is okay too, such as loft to a point… For the surface loft, the profiles should be the same types, closed or opened for all of them. As line, arc and spline are opened, it is fine to create surfce loft to line, arc, spline.
Can you loft to a point in SolidWorks?
You can create a loft to a point, even if the point is part of a sketch containing other sketch entities.
What is the difference between loft and sweep in Solidworks?
The loft tool is designed to follow a path that has differently shaped cross-sections throughout, unlike the sweep which can only handle one cross-section.
What is a Solidworks loft?
Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. You create a loft using two or more profiles. Only the first, last, or first and last profiles can be points. All sketch entities, including guide curves and profiles, can be contained in a single 3D sketch.
What is the minimum number of guide curves required to create a loft?
At minimum, loft function requires two closed-loop sketch. 4. Draw the “Guide curve” for the loft operation. This step is not mandatory, only if user requires the profile to follow defined path.
Why is my loft twisted solidworks?
The loft should result in a rectuangular solid. Now try the same thing but select the first profile in the upper left corner and the second in the lower right corner. This result will be twisted. It is as if your selection point on each profile creates an imaginary guide curve.
How many sketches do we need to use the feature lofted boss in Solidworks?
Sketch your profiles. A minimum of two are required but a higher number of profiles allows you to create more complex shapes. Ideally profiles should be closed but Thin Feature Lofts can be created.
What is the correct comparison between an extruded revolved lofted swept and extruded cut revolved cut lofted cut swept cut )?
What is the correct comparison between an Extruded (Revolved, Lofted, Swept) and Extruded Cut (Revolved Cut, Lofted Cut, Swept Cut)? An extruded feature adds material; an extruded cut divides the feature into equal pieces.
Why do you create and use document templates?
2 Why do you create and use Document Templates? Document Templates contain the units, grid and text settings for the model. You can create Metric and English templates each with different settings.
What is loft boss base in Solidworks?
Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. You create a loft using two or more profiles. Only the first, last, or first and last profiles can be points. All sketch entities, including guide curves and profiles, can be contained in a single 3D sketch.
What does split line do in Solidworks?
tool projects an entity (sketch, solid, surface, face, plane, or surface spline) to surfaces, or curved or planar faces. It divides a selected face into multiple separate faces.
How do you make a subassembly flexible in Solidworks?
Making a Subassembly Flexible To make a subassembly flexible: Click a subassembly in the FeatureManager design tree and select Component Properties . In the dialog box, under Solve as, select Flexible, then click OK.
What is the minimum number of profiles for a Loft feature?
Default (Available with three profiles minimum).
When you select multiple edges to chamfer a flag is displayed?
True or False: A Chamfer can be applied to an edge, face, or vertex. When you select multiple edges to Chamfer, a flag is displayed on each edge and each one can be given individual Chamfer dimensions.
How do you use loft guide curves?
Setting up a Loft for use of Guide Curves Open the Fit to Spline tool and select all sketch segments that make up the profile sketch. Set Fit Tolerance to 0mm and check the box for Remove Original Entities. Click OK and the sketch segments will be replaced by a single spline creating the profile sketch.
