Contents
What does lock rotation do in Solidworks?
Use Lock Rotation Concentric mates and slot mates, as of SOLIDWORKS 2021, have a Lock Rotation option. This prevents a cylindrical part from being able to rotate on its axis and helps to fully define it.
What is lock mate in Solidworks?
A Lock mate maintains the position and orientation between two components. The components are fully constrained relative to each other. A Lock mate has the same effect as forming a subassembly between the two components and making the subassembly rigid.
How do you freeze in Solidworks?
To turn on the freeze bar, click Tools > Options > System Options > General and select Enable Freeze bar.
How do I stop my shaft from rotating?
1) Rely on press-fit bearings to fit well enough to not move. 2) Use a shaft collar with set screw right outside the bearing. 3) Use a pin through a drilled hole in the shaft. 4) Thread the ends of the shaft and use a lock nut.
How do you mate Concentric in Solidworks?
Quick Mates Simply hold down Ctrl and select the two entities you wish to mate. The supported mate types are all standard mates (Concentric, Coincident, Equal, etc), as well as some advanced mates (Profile Center, Symmetric and Width) and some mechanical mates (Cam and Slot).
What is a tangent mate in Solidworks?
Standard Mates Perpendicular: Places selected items at a 90 degree angle from each other. Tangent: Places a cylindrical, spherical, or conical face tangent with another component. Concentric: Places two cylindrical, spherical or conical faces of a part so that they share the same centerline.
Which display mode is suitable for viewing only edge of a model in Solidworks?
Edge display in shaded with edges mode Use to accurately display thin-walled parts and assemblies and to prevent edges from blending. To use this option the graphics card and driver must support OpenGl 4.0, GLSL 4.0 or greater. All edges are shown in Shaded With Edges mode (like Wireframe).
How do you use interference detection in SolidWorks?
Interference Detection PropertyManager. You can select components to check and set options for types of interferences to find, and then calculate results. To open this PropertyManager: Click Interference Detection (Assembly toolbar) or Tools > Evaluate > Interference Detection.
Why does solidworks keep freezing?
You will need to make sure that Solidworks is set to be using either the global setting (Auto-select: NVIDIA GPU) or High-performance NVIDIA processor. After checking the above settings, Solidworks RX diagnostics should show the correct graphics card and your Solidworks will stop crashing when placing a sketch.
What is rollback in Solidworks?
You can use the FeatureManager rollback bar or shortcut menu to temporarily roll back to an earlier state, to absorbed features, roll forward, roll to previous, or roll to the end of the FeatureManager design tree. You can add new features or edit existing features while the model is in the rolled-back state.
How do you float an object in Solidworks?
Right-click the component in the graphics area or the component’s name in the FeatureManager design tree. Select Fix or Float. In assemblies with multiple configurations, select This Configuration, All Configurations, or Specified Configurations.
Why is part fixed in Solidworks assembly?
It is recommended that at least one assembly component is either fixed, or mated to the assembly planes or origin. This gives a frame of reference for all other mates, and helps prevent unexpected movement of components when mates are added. A fixed component has a (f) before its name in the FeatureManager design tree.
How many entities can you choose to mate with an angle mate?
Click Mate (Assembly toolbar) or Insert > Mate. In the Mate PropertyManager, for Entities to Mate , select two entities in the graphics area or the flyout FeatureManager design tree. Under Standard Mates, click Angle and set the dimension.
Where is mate in Solidworks?
To add a mate: Click Mate (Assembly toolbar), or click Insert > Mate. In the PropertyManager, under Mate Selections, select the entities that you want to mate together for Entities to Mate .
What is a tangent mate?
Tangent Mate: Desktop. Mate two entities tangent to the selected faces, edges, or vertices. Tangent Mates do not require or accept Mate connectors.