Contents
How do I add text in Solidworks 2018?
Click a face of a part. (Sketch toolbar) or Tools > Sketch Entities > Text . To create a profile for placing the text, sketch a circle or a continuous profile from lines, arcs, or splines in a sketch, close the sketch, then open another sketch for the text.
Can you extrude text in Solidworks?
You can sketch text on the face of a part and extrude or cut the text. The text can be inserted on any set of continuous curves or edges, including circles or profiles made up of lines, arcs, or splines.
How do you create text in Solidworks?
Click a face of a part. (Sketch toolbar) or Tools > Sketch Entities > Text . To create a profile for placing the text, sketch a circle or a continuous profile from lines, arcs, or splines in a sketch, close the sketch, then open another sketch for the text.
How do I change a part name in Solidworks?
Click-pause-click the component. Right-click the component and click Rename Assembly or Rename Part.
How do I color text in SolidWorks?
To set system colors: Click Options (Standard toolbar) or Tools > Options, and select Colors.
How do you move text in Solidworks?
To move: Click the line or text and drag to a new location. (Annotation toolbar), or click Insert > Annotations > Note. Specify the text properties, then click to place the text in the desired location.
What is sketch text?
Sketch text on any set of continuous curves or edges (including circles or profiles made up of lines, arcs, or splines on the face of a part) and extrude or cut the text. The text is sketched along the outside edge of the face of the part, formatted, then cut. A sketched spline creates an offset edge.
How do I modify a part in Inventor?
Right-click the part, and then select Edit Feature. Use the sketch and feature commands to add, edit, or delete features. Save the part file. The changes you make are reflected in all occurrences of the part in the assembly file (and other assemblies that use the part).
How do I cut an assembly in Solidworks?
To create an assembly feature cut: Open a sketch on a face or plane, and sketch a profile of the cut. The profile can contain more than one closed contour. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
How do I move a SolidWorks file without breaking references?
Right click on a part of a SolidWorks part file and open the SolidWork context menu. Select rename or move from the SolidWorks context menu. Move the file or rename the file in the prompt which appears after selecting the option you want.
How do I move a SolidWorks file?
In File Explorer or in the SOLIDWORKS Task Pane File Explorer, right-click a SOLIDWORKS document and click SOLIDWORKS > Rename, Replace, or Move.
How do you create a configuration table in Solidworks?
To start a Modify Configurations table, right-click on any feature, dimension, mate or component and select the “Configure Feature”, “Configure Dimension” or “Configure Component” command.
How do I edit a title block in Solidworks?
To edit the title block, the sheet properties, or add or delete a sheet, right click anywhere on the sheet in the design space and select the desired option. To edit the title block, once Edit Sheet Format has been selected, the title block can be edited.
How do you extrude numbers in SolidWorks?
The Extruded Cut feature can be found on the features tab in the Command Manager interface as shown in Figure 1. You can also go to the toolbar and click Insert -> Cut -> Extrude to pull up the Cut-Extrude Feature menu as well.
How do I dissolve text in SolidWorks?
If you would prefer the Sketch text to not behave like a block, it can be broken down into its separate sketch entities by right clicking and choosing to “dissolve sketch text.” Dissolving the sketch text will no longer allow you to make changes to the text.
