Contents
How do you hide drawing view in SolidWorks?
To hide or show views: Right-click the view on the sheet or in the FeatureManager design tree, and select Hide.
What is full section view?
What is full section? A sectional view obtained by assuming that the object is completely cut by a plane is called a full section or sectional view. Figure a shows the view from the right of the object shown in Fig. a, in full section. The view should also contain the visible parts behind the cutting plane.
How do I shorten a section line?
All you have to do is right click on the section view line and select Edit Cutting Line. You can either edit sketch or change from a section to half section.
How do you hide all sketches in Solidworks?
To hide all types in the current document: Click View > Hide/Show > Hide All Types. After you select Hide All Types, you cannot show any hidden items until you clear Hide All Types.
How do you unhide something in Solidworks?
Right-click on the blank graphics area and select “Show Hidden Components.” SOLIDWORKS will display any components hidden in the assembly. If you click on the component, it will show it when you exit this state (which can be done by clicking Escape on your keyboard or clicking “Exit Show-Hidden”).
How do you hide sketch lines in Solidworks drawing?
To hide a sketch in a drawing, right-click the sketch in the graphics area or in the FeatureManager design tree and select Hide.
How do I move a section view?
During view creation, as you drag out the section view, hit the Shift button and you will be able to move the view off that projection line. Once a section view is placed, if you select it and then move it via the center grip, hitting Shift will toggle the view between free moving and the perpendicular tracking line.
How do you move a section view in Inventor?
Select the method of the section view, projected or aligned, if possible. Move the preview to the appropriate location, and then click to place the view. (To place the view without alignment to the parent view, press Ctrl as you move and place the preview.)
How do you show section view in drawing?
When sketching an object or part that requires a sectional view, they are drawn by eye at an angle of approximately 45 degrees, and are spaced about 1/8” apart. Since they are used to set off a section, they must be drawn with care. It is best to use the symbol for the material being shown as a section on a sketch.
How do you save a section view in Solidworks?
Once the desired Section View has been generated and before clicking OK to create it, scroll down in the PropertyManager and select Save.
What is the use of section view in design in Solidworks?
In a section view in a part or assembly document, the model is displayed as if cut by planes and faces that you specify, to show the internal construction of the model. You can: Select bodies or components to include in or exclude from section views.
What are the 7 types of sectional views?
There are a number of different types of sectional views that can be drawn. A few of the more common ones are: full sections, half sections, broken sections, rotated or revolved sections, removed sections, offset sections, and assembly sections.
What is a broken out section view?
A broken-out section view cuts away a portion of an assembly in a drawing view to expose the inside. … A broken-out section is part of an existing drawing view, not a separate view. A closed profile, usually a spline, defines the broken-out section. Material is removed to a specified depth to expose inner details.
How do I delete part of a line in Solidworks?
To delete: Click the line or text and press the Delete key. To move: Click the line or text and drag to a new location.
How do you hide a formula in Solidworks?
To disable equations, in Equations, Global Variables, and Dimensions dialog box, in any view, right-click an equation and click Disable Equation. The equation disappears from the view.
