Contents
Can we extrude the sketch in both direction in Ansys?
Yes, using extruded direction selection in the box under the end condition drop down.
How do you extrude an angle in sketch in Solidworks?
If you have a sketch and just want a simple extrude at an angle then just select the draft button while doing the extrude and select the angle, then select wether you want it to be outward or inward.
How do you thicken a surface in Solidworks?
To thicken a surface: Click Thicken on the Features toolbar, or click Insert > Boss/Base > Thicken. Examine the preview, and select the side of the surface you want to thicken, as shown below. Enter the Thickness .
What is Extrude command in Solidworks?
Using the SOLIDWORKS Surface Extrude feature, we can extrude the boundary edges of a face of a solid body or edges of a surface body in a customized direction. When we run the Extruded Surface command, two things can happen: Either a sketch is active or preselected or no sketches exists.
How do you make a helicoil in SolidWorks?
Helicoil Tap Drill sizes are available in the Hole Wizard inside of SolidWorks. If you set the Hole Type to “Hole” as shown in the image above. “Helicoil Tap Drills” is available in the “Type” pull down. You can set the “Size” to the thread size needed and the hole size is automatically set!
How do you cut extrude in Solidworks?
To create an extruded cut: 1) Sketch the profile for cut. 2) Click Extruded Cut on the Features toolbar or select Insert, Cut, Extrude on the menu bar. 3) Under Direction 1, do the following: · Select an End Condition. Examine the preview and if necessary, click Reverse Direction to extrude in the opposite direction.
How do you remove extrude in Solidworks?
Select the end condition. Select a plane to define an extrude direction normal to the plane. To remove the faces defining the extrude from the model after extruding, click Delete original faces.
How do you cut something in Solidworks?
Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies. Examine the preview. If necessary, click Flip cut to reverse the direction of the cut.
Can we extrude the sketch in both direction yes or no?
To extrude in both directions from the sketch plane in the PropertyManager, under Direction 1, select Through All – Both Directions. To extrude as a thin feature, set the PropertyManager options in Thin Feature.
How do you extrude both sides in Creo?
To create a two-sided feature, start creating an extrusion with a depth option defined for one side. Then click the Options tab, or right-click the graphics window or a drag handle, and define the depth option for the second side.
Why can’t I extrude cut in Solidworks?
Most times it’s a tiny tiny gap in the shape that won’t let you cut since the profile is not complete. Another option is to just try cut extrude as a “thin feature” though this will not give you the result you want you should be able to see if any gaps exist.
Where is boss Extrude in Solidworks?
The Extruded Boss/Base feature can be found on the features tab in the Command Manager interface as shown in Figure 1. You can also go to the toolbar and click Insert -> Boss/Base -> Extrude to pull up the Boss-Extrude Feature menu as well.
How do you edit Extrude in SolidWorks?
If you enter the wrong distance to extrude to: and exit the boss-extrude dialog without correcting it, go to the design tree, right-click on the extrude name, and find the “edit feature” button in the box of options that appears above the mouse. The dialog will reopen and you can edit the properties of the extrude.
How do you delete extra materials in Solidworks?
In a part document, right-click Material in the FeatureManager design tree and select Remove Material. Search ‘Removing a Material’ in the SOLIDWORKS Knowledge Base.
How do I delete a feature without deleting the sketch in Solidworks?
In SolidWorks 2014 version you have the option to delete the Parent feature without deleting the child features. The last option is to select the Advanced Confirm Delete dialog box and as shown below, it lets you selectively delete child and absorbed features.