Solidworks

how to extrude a sphere in solidworks ?

Contents

Can you extrude an open sketch in Solidworks?

Click Extrude (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Extrude, and click in the graphics area to establish the direction of the extrusion. The Base-Extrude PropertyManager appears.

What is Extrude command in Solidworks?

Using the SOLIDWORKS Surface Extrude feature, we can extrude the boundary edges of a face of a solid body or edges of a surface body in a customized direction. When we run the Extruded Surface command, two things can happen: Either a sketch is active or preselected or no sketches exists.

Can we extrude the sketch in both direction yes or no?

To extrude in both directions from the sketch plane in the PropertyManager, under Direction 1, select Through All – Both Directions. To extrude as a thin feature, set the PropertyManager options in Thin Feature.

Which 3D tool is used to draw a sphere?

Use the 3D Tool in Illustrator All you have to do to draw a sphere in Illustrator is to draw a circle and cut that circle into a half circle. Then add the 3D revolve effect and “presto”, you have a perfect sphere. You even have some control on the surface texture and the light source.

How do you make a 3d sphere out of paper?

Use sharp scissors to cut your paper into 12 strips that are ½-inch (1.25 centimeters) wide and 6 inches (15.25 centimeters) long. Punch holes through both ends of the strips. Evenly stack the strips of paper. Punch a hole on either end of the stack using a standard hole punch.

INTERESTING:   how to cut into a cylinder in solidworks ?

What is Sphere in Autocad?

You can create a sphere by specifying a center point and a point on the radius. You can control the smoothness of curved 3D solids, such as a sphere, in a shaded or hidden visual style with the FACETRES system variable.

Can you Extrude an open contour?

For example, an Extrude with an open contour will appear as “Extrude-Thin1” in the feature tree as seen in the above image. The above image depicts the comparison between a regular Boss Extrude, Cut Extrude and Revolve with their respective thin feature counterparts.

How do you fix an open sketch in Solidworks?

To open the Repair Sketch tool: Click Tools > Sketch Tools > Repair Sketch. Repair Sketch deletes these from the sketch.

Can we Extrude the sketch in both direction in Ansys?

Yes, using extruded direction selection in the box under the end condition drop down.

Why can’t I extrude cut in Solidworks?

Most times it’s a tiny tiny gap in the shape that won’t let you cut since the profile is not complete. Another option is to just try cut extrude as a “thin feature” though this will not give you the result you want you should be able to see if any gaps exist.

Where is boss extrude in Solidworks?

The Extruded Boss/Base feature can be found on the features tab in the Command Manager interface as shown in Figure 1. You can also go to the toolbar and click Insert -> Boss/Base -> Extrude to pull up the Boss-Extrude Feature menu as well.

INTERESTING:   how to fillet a cylinder in solidworks ?

Which option is used to extrude the sketch that passes through all surfaces?

Select an existing sketch and then click Model > Extrude. This method is referred to as object-action. Select a datum plane or planar surface to use as the sketching plane and then click Model > Extrude.

What does boss mean in Solidworks?

boss/base A base is the first solid feature of a part, created by a boss. A boss is a feature that creates the base of a part, or adds material to a part, by extruding, revolving, sweeping, or lofting a sketch, or by thickening a surface.

How do you extrude the opposite direction in Solidworks?

Select a face or plane in the graphics area for Face/Plane , and enter the Offset Distance . Select Translate surface to make the end of the extrusion a translation of the reference surface, rather than a true offset. If necessary, select Reverse offset to offset in the opposite direction.

How do you make a semicircle in Freecad?

If the Edit → Preferences… → Draft → General settings → Draft tools options → Use Part Primitives when available option is checked, the command will create a Part Circle instead of a Draft Circle.

Back to top button

Adblock Detected

Please disable your ad blocker to be able to view the page content. For an independent site with free content, it's literally a matter of life and death to have ads. Thank you for your understanding! Thanks