Contents
How do you Extrude a sketch in Solidworks?
Click Convert to Extrusion (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Extrude, and click in the graphics area to establish the direction of the extrusion. The Base-Extrude PropertyManager appears. Edit the properties in the Base Extrude PropertyManager.
What is Extrude feature in Solidworks?
on the Surfaces toolbar, or click Insert > Surface > Extrude. Set the PropertyManager options. To extrude in both directions from the sketch plane in the PropertyManager, under Direction 1, select Through All – Both Directions. To extrude as a thin feature, set the PropertyManager options in Thin Feature.
Can you Extrude a line in Solidworks?
Select the sketch entities required for the feature. It is not necessary to select a complete sketch. … Click Extrude (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Extrude, and click in the graphics area to establish the direction of the extrusion.
Can you Extrude an open sketch?
Yes is Possible to Extrude!, but you have to be in the Patch Mode, and then use the Extrude from the Create sub-menu.
Can we extrude the sketch in both direction in Ansys?
Yes, using extruded direction selection in the box under the end condition drop down.
How do you add a boss in Solidworks?
The mounting boss feature can be found under Insert> Fastening feature > Mounting Boss. The mounting boss command requires a face or 3D point on which to locate the geometry on. The procedure which I have found helpful is to select a face in the general position that you want the boss to go.
When extrude selecting direction 2 allows you to extrude?
With the Direction 2 option, you can add a second direction to the extrude. You can also add a second draft to this direction as shown in the picture. Change the Draft angle to 30 degrees. to 10 mm as shown in the picture.
How do you remove Extrude in Solidworks?
Select the end condition. Select a plane to define an extrude direction normal to the plane. To remove the faces defining the extrude from the model after extruding, click Delete original faces.
Can you extrude a curve?
Select the edges/or faces you want to extrude and the curve you want to extrude along. Select Edit Mesh > Extrude > . Turn on either the Selected or Generated options. Click Extrude.
How do you fix an open sketch in Solidworks?
To open the Repair Sketch tool: Click Tools > Sketch Tools > Repair Sketch. Repair Sketch deletes these from the sketch.
How do you Extrude a 3D sketch boss?
You can also go to the toolbar and click Insert -> Boss/Base -> Extrude to pull up the Boss-Extrude Feature menu as well. Once the Extrude menu appears on the left-hand side of your screen, it will prompt you to select a plane or sketch that will be used to create a 3D model from.
What does the Convert Entities sketch tool do?
The Convert Entities tool allows users to make a copied projection of a given sketch, face, or set of edges onto the active sketch plane. These sketch entities will update their size and/or positioning if either of these characteristics changes in the source sketch.
How many entities can you choose to mate with an angle mate?
Click Mate (Assembly toolbar) or Insert > Mate. In the Mate PropertyManager, for Entities to Mate , select two entities in the graphics area or the flyout FeatureManager design tree. Under Standard Mates, click Angle and set the dimension.
How do you extrude both sides in Creo?
To create a two-sided feature, start creating an extrusion with a depth option defined for one side. Then click the Options tab, or right-click the graphics window or a drag handle, and define the depth option for the second side.
Can we give negative values in depth option during extrude process?
Specify the depth of an extruded feature by selecting one of the following depth options: Blind—Extrudes a section from the sketching plane to the specified depth value. Specifying a negative depth value flips the depth direction. … You cannot use a datum plane as a terminating surface.