Solidworks

how to draw a sketch point in solidworks ?

Contents

How do you show drawing sketch in Solidworks?

To show a sketch in a drawing: Right-click the sketch in the FeatureManager design tree and select Show. The sketch entities highlight in the graphics area when you point over the sketch name in the FeatureManager design tree. (Annotation toolbar), or click Insert > Model Items.

What is a sketch point used for in Solidworks?

Insert points into sketches and drawings. To create sketch points: Click Point (Sketch toolbar) or Tools > Sketch Entities > Point.

How do I keep sketch visible in Solidworks?

Control the visibility of sketches. In drawing documents, View > Hide/Show > Sketches affects sketches that exist in the FeatureManager design tree only. For example, if you create a sketch on a model, and the sketch exists in the FeatureManager design tree, you can hide or show the sketch in a drawing.

How do you hide all sketch lines in Solidworks?

Hide All Types does not hide decals, sketch relations, or the grid. To hide all types in the current document: Click View > Hide/Show > Hide All Types. After you select Hide All Types, you cannot show any hidden items until you clear Hide All Types.

How do you show sketches in Inventor drawing?

On the ribbon, click Place Views tab Sketch panel Create Sketch. Click in the graphic window to place the sketch on the sheet, or select a drawing view to associate the sketch to the view.

How do you hide a formula in Solidworks?

To disable equations, in Equations, Global Variables, and Dimensions dialog box, in any view, right-click an equation and click Disable Equation. The equation disappears from the view.

INTERESTING:   How to Make a Sphere IN Solidworks ?

How do I change the orientation of a drawing in SolidWorks?

Click View Orientation (View toolbar). Click View > Modify > Orientation. Press the Space Bar. Right-click in a drawing sheet and select Zoom/Pan/Rotate > View Orientation.

How do I hide construction lines in Solidworks assembly?

To hide all construction geometry, use the “Shift” and “P” keys simultaneously.

How do I get rid of fillet lines in Solidworks?

RE: Removing fillet edges in drawings If you mean the line that is displaying the tangent edge of a fillet, just right click somewhere in the view and under “tangent edges”, choose “tangent edges removed”. This will apply to the whole view.

How do I delete a construction line in Solidworks?

To delete all construction lines, click Geometry > Delete All. 2. To delete selected construction lines, select the lines to delete, right-click choose Delete from the shortcut menu, or press DELETE.

Who invented drawing?

The earliest known drawings date from 30,000 to 10,000 B.C.. They were found on the walls of caves in France and Spain. Other examples of early drawing are designs that were scratched, carved, or painted on the surfaces of primitive tools.

What is a CAD diagram?

A CAD drawing is a detailed 2D or 3D illustration displaying the components of an engineering or architectural project. Computer-aided design utilizes software to create drawings to be used throughout the entire process of a design project, from conceptual design to construction or assembly.

How do I show XYZ in Solidworks?

To turn the display of axes on or off: Click View > Hide/Show > Axes. Search ‘Turning the Display of Axes On or Off’ in the SOLIDWORKS Knowledge Base. SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation.

INTERESTING:   how to fill in a sketch in solidworks ?

How do you move a coordinate system in Creo?

Click the drag handle at the center of the coordinate system to rotate the coordinate system about each of the reference coordinate system’s axes. To change directions, point to the drag handle and then move the pointer toward one of the axes. As you move the cursor toward the axes, the drag handle changes direction.

Why is Y up in Solidworks?

By default, the “Y” direction has always been the up-direction views in SOLIDWORKS. … Bringing SOLIDWORKS models into CAM software can involve extra time and work rotating the geometry. Usually the default up direction in these software packages is the “Z” direction.

Back to top button

Adblock Detected

Please disable your ad blocker to be able to view the page content. For an independent site with free content, it's literally a matter of life and death to have ads. Thank you for your understanding! Thanks