Contents
What is an aligned section view?
An aligned section view / cut is a view created from a cutting profile defined from non parallel planes. In order to include in a section certain angled elements, the cutting plane may be bent so as to pass through those features. The plane and feature are then imagined to be revolved into the original plane.
What is a broken out section view?
A broken-out section view cuts away a portion of an assembly in a drawing view to expose the inside. … A broken-out section is part of an existing drawing view, not a separate view. A closed profile, usually a spline, defines the broken-out section. Material is removed to a specified depth to expose inner details.
What is a section view?
What is a “Section View” ? ∎ A section view is a view used on a drawing to. show an area or hidden part of an object by. cutting away or removing some of that object.
How do you read a section view?
When sketching an object or part that requires a sectional view, they are drawn by eye at an angle of approximately 45 degrees, and are spaced about 1/8” apart. Since they are used to set off a section, they must be drawn with care. It is best to use the symbol for the material being shown as a section on a sketch.
What are the different types of section views?
There are a number of different types of sectional views that can be drawn. A few of the more common ones are: full sections, half sections, broken sections, rotated or revolved sections, removed sections, offset sections, and assembly sections.
Which is bigger part or section?
part – a general term. eg I can use my hands to break a part off a loaf of bread. section – refers to a part that is more clearly defined. eg it’s easy to divide an orange into sections.
How do you draw a full section view?
A full section view is generated by running the cutting plane through the entire length of the object being sectioned. Click the view you want to use as the parent view. The start direction arrow appears at the cursor. Click in the drawing area to indicate the start point of the section line.
Which way do section arrows point?
The arrows point toward the lower half in the same direction of sight as for a top view. This result is top view in section.
How do you remove a broken view in Solidworks?
Right-click the broken view, and select Un-Break View. The break lines remain in the view and you can delete them.
What is a half section view?
A half-section is a view of an object showing one-half of the view in section. Half Section. • Symmetrical parts can be shown in half sections.
What is section view explain with examples?
A sectional view or a section looks inside an object. Sections are used to clarify the interior construction of a part that cannot be clearly described by hidden lines in exterior views. By taking an imaginary cut through the object and removing a portion, the inside features may be seen more clearly.
What is the difference between full section and half section view?
2 What is the difference between a half and a full section? – A full section view is the full section. The half section view is half of the section. It is used when the object is symmetrical in both inside and outside details.
When and why is a section view necessary?
In which case, the direction of sight is towards one half of the object. The other half is then mentally discarded. Drafters use sectional views to improve the clarity of complex objects when internal surfaces result in too many hidden lines. Special conventions are used to make a sectional view easy to understand.
Section views do not include hidden lines. Any material cut when a section view is defined is hatched using section lines. There are many different styles of hatching, but the general style is evenly spaced 45° lines.
What is true shape of section?
True shape of section: The true form of the cut surface is called true shape of section. It is obtained by viewing the object normal to the cut surface and projecting it on a plane parallel to the section plane.
