Solidworks

how to create a work plane in solidworks

Contents

How do you make a parallel plane in Solidworks?

Right-click a face in the graphics area and click Create a Plane Parallel to Screen. The software adds an On Plane or On Surface 3D sketch point where you right-clicked and positions a reference plane parallel to the screen at that point. The sketch point may move if the surface moves.

How many entities can you choose to mate with an angle mate?

Click Mate (Assembly toolbar) or Insert > Mate. In the Mate PropertyManager, for Entities to Mate , select two entities in the graphics area or the flyout FeatureManager design tree. Under Standard Mates, click Angle and set the dimension.

How many types of work points are there?

Essentially, there are three types of points: Smooth Point. Straight Point. Corner Point.

What is reference plane in balancing?

When several masses revolve in different planes, they may be transferred to a reference plane and this reference plane is a plane passing through a point on the axis of rotation and perpendicular to it. … the forces in the reference plane must balance, i.e., the resultant force must be zero and 2.

What is use of reference plane and write its types in Solidworks?

Reference planes were added to facilitate an extruded cut on a non-planar face, and a temporary axis was used to align the rectangular sketch properly. Finally, a new coordinate system was created to determine the coordinates of the center of mass from a relative location.

How do you offset a plane?

To create an Offset Plane, select a planar face or plane that you want to offset from and specify the offset distance. Select the Flip offset button if you need the plane to be created in the opposite direction.

INTERESTING:   how to show intersection point in solidworks drawing ?

Do assemblies have reference planes?

Reference planes exist in the Part, Sheet Metal and Assembly environments. You can use both part and assembly reference planes to position parts in an assembly. To make the assembly display more cleanly, reference planes for parts and subassemblies are displayed only when you place and edit them.

What does Multiple mate mode allow a user to do?

Advanced Mates Constrains a tab between two planar faces. Constrains a selected point on a component to a path. Establishes a relationship between the translation of one component and the translation of another component. Allows components to move within a range of values for distance and angle mates.

Can we apply the fixed angle mate between two curves?

You can control component motion in an animation by mating the component to a single entity curve, using coincident mates, or to a multiple entity curve, using path mates. You can also use a curve to define camera-based walk-through animations.

Can you extrude a line in Solidworks?

Select the sketch entities required for the feature. It is not necessary to select a complete sketch. … Click Extrude (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Extrude, and click in the graphics area to establish the direction of the extrusion.

How do I create a plane at an angle to another plane?

The trick is simple: select a plane as the first reference and then select the multiple plane option BEFORE you pick the axis. Then select the angle option and type in 10 degrees and 36 in the ‘Number of planes to create’. This creates all 36 instantly!

INTERESTING:   CEO Bertrand Sicot's perspective on SolidWorks 2013

How do you make an angled plane in Solid Edge?

Angled Plane: You can create a plane inclined with some face or plane by this option. You have to select the face and edge to define the angle. Coincident Plane by Axis: This is similar to the “Coincident plane” but you can orient the resultant plane here. Plane Normal to a Curve: You need to have a curve first.

What are the two types of points?

Non-collinear points: These points, like points X, Y, and Z in the above figure, don’t all lie on the same line. Coplanar points: A group of points that lie in the same plane are coplanar. Any two or three points are always coplanar. Four or more points might or might not be coplanar.

What is a work point?

A work point is an independent entity whose location is defined in space. Work points may be placed or projected onto part faces, linear edges, or onto an arc or circle. Work points can be constrained to the center points of arcs, circles, and ellipses.

How many work planes are present in every user coordinate system?

UCS (user coordinate system) is a collection of work features (three workplanes, three axes, and a center point).

Back to top button

Adblock Detected

Please disable your ad blocker to be able to view the page content. For an independent site with free content, it's literally a matter of life and death to have ads. Thank you for your understanding! Thanks