Contents
How do you change dimensions in Solidworks?
To change a dimension: Double-click a dimension. The Modify dialog box appears. Change the dimension value with the arrows, thumbwheel , mouse wheel, or by typing in the dimension box.
How do you make a title block bigger in Solidworks?
Open the drawing, right-click on the white area of the sheet, select “edit sheet format”, Draw a line from corner to corner so you can scale about the midpoint of the title block, select all entities with left to write window select, Goto Tools…
How do I resize a block in AutoCAD?
Open your block in AutoCAD. Press ‘Ctrl+1’ and open Properties palette. Increase the Value of Scale X, Scale Y and Scale Z fields.
How do you scale?
To scale an object to a smaller size, you simply divide each dimension by the required scale factor. For example, if you would like to apply a scale factor of 1:6 and the length of the item is 60 cm, you simply divide 60 / 6 = 10 cm to get the new dimension.
How do you change inches to mm in SOLIDWORKS?
It is sometimes required to change the unit system of a particular file. This can be done by changing the Units settings from Tools > Options > Document Properties > Units. The same menu can be accessed in the bottom right hand corner of the SOLIDWORKS window.
How do you move a title block in Solidworks?
To edit the title block, the sheet properties, or add or delete a sheet, right click anywhere on the sheet in the design space and select the desired option. To edit the title block, once Edit Sheet Format has been selected, the title block can be edited.
How do I make parts smaller in Solidworks assembly?
Access the Scale tool (Insert, Features, Scale). Select all of the solid bodies in the part to be scaled. Choose the Scale Factor and other options as desired (for best results with a multi-body part, scale about the Origin). Click OK, as shown in the figure below.
How big is the solidworks download?
The download size for SOLIDWORKS Standard is typically 6-7GB, this could increase up to 12GB or more if you are running SOLIDWORKS Premium with Multi-Product add-ins.
How much space does solidworks?
2GB free disk space; 5GB recommended. 2GB or more GPU RAM; 4GB recommended. NVIDIA® graphics card: NVIDIA Quadro®/NVIDIA GeForce®/Tesla™ with at least NVIDIA Kepler™ chip; Dual-GPU setup with at least NVIDIA Maxwell™ cards for the best experience.
How do I change scale 1 to 100 in AutoCAD?
For scale of 1:100 use the SCALE command to scale the rectangle 100 times. Put this rectangle around what you want to plot then plot using Window and select the corners of the rectangle. Use scale to fit for the scaling and print it out.
How do I resize a rectangle in AutoCAD?
How to scale down in AutoCAD – Window select the object(s) in AutoCAD, type SCALE, and then specify a number between 0 and 1. Hit Enter. The size of the object(s) will SCALE DOWN by that factor. How to scale up in AutoCAD – Window select the object(s), type SCALE, and then specify a number larger than 1.
How do I edit a block in AutoCAD?
To edit a block in-place, do any of the following: Right-click on the block and select Edit Block In-Place. Use the command REFEDIT to open the in-place block editor for a selected block. After editing, use the REFCLOSE command to close it.
What is full size scale?
Full scale is simply letting one inch on a ruler, steel rule, or draftsman’s scale equal one inch on the actual object. Rules of this kind are usually divided into 1 /16” or 1 /32” units. The first measurement exercise will be with full size. If you can measure accurately in full scale, you may want to skip ahead.
How do you clear a dimension in Solidworks?
To remove a dimension from a drawing: Select a dimension and press Delete. Be careful not to delete any dimension that has a reference, such as one used in a note. Search ‘Deleting Dimensions’ in the SOLIDWORKS Knowledge Base.
How do you show units in SolidWorks drawings?
You can show dimension units in drawings. In a drawing, click Options (Standard toolbar) or Tools > Options. On the Document Properties tab, click Dimensions and select Show units of dimensions. Click OK.
