Contents
How do you break a leader in Solidworks?
Click on the dimension, select the ‘Leader’ tab and the settings are there under ‘Break Lines’.
What is a leader line?
A leader line is a line that establishes a connection between a graphical representation of an item and some text. A leader points to a bit of our drawing and says: ‘Oi – Look Here’ and ‘Read This! ‘. The leader line itself should be a continuous Thin line (see this post on Linetype Definitions).
What is a phantom line?
Phantom lines are long-short-short-long lines most often used to show the travel or movement of an object or a part in alternate positions.
How do I reduce the size of a dimension in Solidworks?
To change a dimension: Double-click a dimension. The Modify dialog box appears. Change the dimension value with the arrows, thumbwheel , mouse wheel, or by typing in the dimension box.
How do you add a leader to a balloon in Solidworks?
To add more leaders to an existing balloon: Ctrl + drag a leader attachment point. SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation.
How do I change the leader line in Solidworks?
Click Options , and then select the Document Properties tab. Select the type of annotation or dimension for which you intend to customize the frame or leader line thickness. Select a thickness from the list, or select Custom Size and enter a value for the custom thickness.
What are extension lines?
Extension lines continue or extend from the surface of the object and establish the size of the dimension. They do not touch the object lines and extend slightly past the dimension line. Extension lines provide a means of displaying a measurement without placing the dimension on the part.
How heavy should Leader line?
When deciding what strength of line I should use as a leader line, a personal rule of thumb is 5 lb (~2.2 kg) or the next common line pound test above or below my mainline. Go with a stronger leader line if you’re concerned with abrasion.
Do I need a leader for braided line?
The simple answer is that when you’re using braided line you should use a leader 90% of the time. … The only time you might want to use straight braid is if you’re fishing extremely dirty water or there’s a lot of vegetation where you’ll get snagged.
Can I use regular fishing line as a leader?
The simple answer is that yes, you can use fluorocarbon line as your leader material and it’s what I use 90% of the time. I prefer using fluorocarbon as my leader material because it’s invisible in the water and is more abrasion-resistant compared to monofilament.
What are the five basic types of lines?
There are 5 main types of lines in art: vertical lines, horizontal lines, diagonal lines, zigzag lines, and curved lines. Other types of lines are simply variations of the five main ones.
What four lines are used to aid in dimensioning?
There are four methods: parallel, running, chain, and combined dimensioning. Some methods of dimensioning a drawing can create an accumulating error.
What is the heaviest line in a drawing?
Alphabet of Lines • Border Line Is the heaviest and darkest line in a drawing. It surrounds a drawing and is usually rectangular in shape. 7. Alphabet of Lines • Visible Lines Are sometimes called object lines.
Where is the property manager in Solidworks?
The Property Manager is a means to set properties and other options for many SolidWorks commands. The PropertyManager appears on the PropertyManager tab in the panel to the left of the graphics area. It opens when you select entities or commands defined in the PropertyManager.
Can you split a surface in Solidworks?
You can split surfaces with the Split tool. You can also split a combination of surfaces and solid bodies. To split a surface: Open install_dir sampleswhatsnewpartssplit.