Contents
How do you offset a plane in Solidworks?
You can also Ctrl + drag an existing plane to create a new plane that is offset from the existing plane.
How do I create a plane at an angle to another plane?
The trick is simple: select a plane as the first reference and then select the multiple plane option BEFORE you pick the axis. Then select the angle option and type in 10 degrees and 36 in the ‘Number of planes to create’. This creates all 36 instantly!
How many entities can you choose to mate with an angle mate?
Click Mate (Assembly toolbar) or Insert > Mate. In the Mate PropertyManager, for Entities to Mate , select two entities in the graphics area or the flyout FeatureManager design tree. Under Standard Mates, click Angle and set the dimension.
How do you offset a plane?
To create an Offset Plane, select a planar face or plane that you want to offset from and specify the offset distance. Select the Flip offset button if you need the plane to be created in the opposite direction.
When a plane is perpendicular to a reference plane its projection on that plane is a?
11. When a plane is perpendicular to a reference plane, its projection on that plane shows its true shape and size. Explanation: When a plane is perpendicular to a reference plane, its projection on that plane is a straight line.
How many types of work points are there?
Essentially, there are three types of points: Smooth Point. Straight Point. Corner Point.
How do you cut in SolidWorks?
Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies. Examine the preview. If necessary, click Flip cut to reverse the direction of the cut.
Can we apply the fixed angle mate between two curves?
You can control component motion in an animation by mating the component to a single entity curve, using coincident mates, or to a multiple entity curve, using path mates. You can also use a curve to define camera-based walk-through animations.
Can you extrude a line in Solidworks?
Select the sketch entities required for the feature. It is not necessary to select a complete sketch. … Click Extrude (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Extrude, and click in the graphics area to establish the direction of the extrusion.
How do you create a reference geometry in Solidworks?
Left click insert → Reference Geometry to insert planes, axis, coordinate system, mate references, and points. Reference Geometry can also be found on the features toolbar. Left click on the pull down arrow and then left click on the desired tool.
How do I reset a plane in Solidworks?
Right-Click the Front Plane and select properties. We want the Change the Name (and description) to refer to ‘Top’ but we can’t have two ‘Top’s at the same time (while renaming at least). So, if the ‘Front’ was called ‘Front Plane’ change it to ‘Top’ (just top). Now Right Click the old ‘Top Plane’ and go to properties.
When a point is above HP and behind VP The point is resting in?
Projection of Points • There are basically nine type of projections of point is space : 1. In FIRST Quadrant (Above H.P. , In front of V.P.) 2. In SECOND Quadrant (Above H.P. , Behind V.P.) 3. In THIRD Quadrant (Below H.P. , Behind V.P.) 4.
When a line is inclined to VP and parallel to HP the front view will be to XY line?
If a line is parallel to H.P., its front will be to XY line. 12. If a line is parallel to V.P., its top view will be to XY line.
When the axis of solid is perpendicular to HP?
Explanation: When the axis of solid is perpendicular to H.P it is indirectly saying that the base is parallel to the horizontal plane so the projection on to it gives true shape of the base and then we can project and find the other dimensions. 4.
What are the two types of points?
Non-collinear points: These points, like points X, Y, and Z in the above figure, don’t all lie on the same line. Coplanar points: A group of points that lie in the same plane are coplanar. Any two or three points are always coplanar. Four or more points might or might not be coplanar.
