Contents
How do you extrude a circle in Solidworks?
Open a sketch on a face or plane, and sketch a profile of the cut. The profile can contain more than one closed contour. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve. Set the options as needed in the Cut-Extrude or Cut-Revolve PropertyManager.
What is bolt circle diameter?
Bolt Circle Diameter (BCD) is the diameter of the circle that goes through the center of all of the bolts on your chainring. On bicycle chainrings, this dimension is usually measured in millimeters. … On a chainring with 4 bolts, the BCD is the distance between two bolts across from each other.
How do you undo an extrusion in SolidWorks?
How do you undo Extrude in Solidworks? Select the end condition. Select a plane to define an extrude direction normal to the plane. To remove the faces defining the extrude from the model after extruding, click Delete original faces.
What is circular pattern in Solidworks?
Use circular patterns to create multiple instances of one or more features that you can space uniformly around an axis. Pattern instances inherit the feature color of the original feature when the: The feature colors are not inherited if you pattern or mirror multibody parts. …
How do you split entities in Solidworks?
In an open sketch, click Split Entities (Sketch toolbar) or Tools > Sketch Tools > Split Entities. The pointer changes to . Click the sketch entity at the location where you want the split to occur. The sketch entity splits into two entities, and a split point is added between the two sketch entities.
How do you make a dome shape in SolidWorks?
Click Dome on the Features toolbar, or click Insert > Features > Dome. Select one or more planar or non-planar faces. Set a value for the distance by which the dome expands. Click to create a concave dome (default is convex).
How do you measure the diameter of a bolt circle?
To measure the center distance between two holes of equal diameter with an electronic caliper. 1. Use the inside jaws to measure the diameter of one of the holes. Before you remove the caliper from the hole, press the button to zero the caliper while it is set to the diameter of the hole.
How do you measure a 4 bolt circle?
4-bolt patterns are measured in a straight line from center to center of two bolt holes sitting directly across from each other.
How do you measure a light pole?
Measure the circumference of the light pole in inches as close to the base as possible. For example, the circumference might be 40 inches. Divide the circumference by 2 times the number pi to get the radius of the base.
What is 110 BCD chainring?
Bolt Circle Diameter (BCD) is the diameter of an imaginary circle running through the center of the chainring mounting holes. It is always defined in millimeters.
What does split line do in Solidworks?
tool projects an entity (sketch, solid, surface, face, plane, or surface spline) to surfaces, or curved or planar faces. It divides a selected face into multiple separate faces.
What is Extrude command in Solidworks?
Using the SOLIDWORKS Surface Extrude feature, we can extrude the boundary edges of a face of a solid body or edges of a surface body in a customized direction. When we run the Extruded Surface command, two things can happen: Either a sketch is active or preselected or no sketches exists.
How do you thicken a surface in Solidworks?
To thicken a surface: Click Thicken on the Features toolbar, or click Insert > Boss/Base > Thicken. Examine the preview, and select the side of the surface you want to thicken, as shown below. Enter the Thickness .
Can we extrude the sketch in both direction yes or no?
To extrude in both directions from the sketch plane in the PropertyManager, under Direction 1, select Through All – Both Directions. To extrude as a thin feature, set the PropertyManager options in Thin Feature.
How do I create a body pattern in Solidworks?
To create a pattern of patterns: Click a pattern tool (Features toolbar) or Insert > Pattern/Mirror and select a pattern tool (linear, circular, or curve driven pattern). You can also use a pattern you created using X-Y coordinates (table pattern) or sketch points.
