Revit

How to select work plane in revit?

Contents

How do you change the work plane in Revit?

1. Select a work plane-based element in a view.

2. Click Modify | tab Work Plane panel (Edit Work Plane).

3. In the Work Plane dialog, select another work plane.

4. If needed, reposition the element on the work plane.

What is a work plane in Revit?

A work plane is a virtual 2-dimensional surface used as the origin for a view or for sketching elements. Work Plane Set or Show or Viewer. on the Architecture, Structure, or Systems tab in projects. on the Create tab of the Family Editor.21 jan. 2021

How do I delete a work plane in Revit?

Use the Delete item to delete the active Workplane. To delete the active Workplane click Workplane tab > Active panel > Delete.16 fév. 2020

What is the work plane?

A work plane is a virtual 2-dimensional surface. A work plane is used in the following ways: as the origin for a view. for sketching elements. for enabling tools in particular views, such as Rotate and Mirror in a 3D view.21 jan. 2021

How do you make a sloped work plane in Revit?

1. Create 1 work plane based on a reference plane (blue) with an angle.

2. Create a section paralel to that reference plane.

3. In the section view, create another work plane based on a reference plane (red) to be possible place the extrusion for the table leg.

How do I create a new work plane?

1. Click plane command.

2. Select offset from a face option.

INTERESTING:   Is revitalift good?

3. In the graphics window, select the face to offset and set the offset value of offset and click apply to create new plane.

4. Click apply to create new plane.

How is switching the view on the work plane helpful?

Where is reference plane in Revit?

1. On the ribbon, click (Reference Plane). Architecture tab Work Plane panel (Reference Plane) Structure tab Work Plane panel (Reference Plane)

2. To draw a line: On the Draw panel, click (Line).

3. To pick an existing line: On the Draw panel, click (Pick Lines).

What is a Workplane in CAD?

The coordinates of the world coordinate system(WCS) define the location of all objects and the standard views of AutoCAD drawings. … AutoCAD provides a movable coordinate system called the user coordinate system(UCS). The XY plane of the UCS is called the workplane.

What is Workplane height?

For office (desk) work the height of the workplane usually is assumed at 0.85 m (33.5 in) in Europe, and at 0.76 m (30 in) in the USA, and for circulation areas (halls, train platforms etc.) at 0.15 – 0.2 m (6 – 8 in).

How do I delete a reference line in Revit?

1. Select a permanent dimension.

2. Right-click the blue control in the middle of a witness line, and click Delete Witness Line.

What is the default measurement of the work plane?

The default measurement of the workplane is 200 x 200. Tinkercad allows you to change the unit of measurement with the Edit grid button. Click on the drop down arrow of Units to switch to Millimeters / Inches.

INTERESTING:   How to make wall profile in revit?

How do you make a sloped extrusion in Revit?

1. Display an elevation, 3D, or section view.

2. Click Architecture tab Build panel Roof drop-down (Roof by Extrusion).

3. Specify the work plane.

4. In the Roof Reference Level and Offset dialog, select a value for Level.

5. To raise or lower the roof from the reference level, specify a value for Offset.

How do you lock an extrusion to reference a plane?

Reference planes are used as construction and guide lines. While in a sketch mode (or after finishing the sketch), a line in an extrusion can be locked with the reference plane it’s on top of by using the align tool to click both lines and then clicking the lock icon (see Figure 11).14 déc. 2015

How do you insert planes in Autocad?

With a new file, click Create New Plane then draw a rectangular plane, then Create New Sketch, click the plane I made to be the sketch plane. then draw on that sketch plane a bit. then exit the sketch.30 mar. 2020

Back to top button

Adblock Detected

Please disable your ad blocker to be able to view the page content. For an independent site with free content, it's literally a matter of life and death to have ads. Thank you for your understanding! Thanks