Contents
Why is my MicroStation file read only?
Suddenly in MicroStation Manager the “Open as read-only” check box is permanently active. It must be deactivated to open a file in edit mode.28 juil. 2014
How do I change references in MicroStation?
In MicroStation go with the cursor on a element of the reference file, which you want to edit, right mouse click and select “Activate”. The reference file will become the active file; the master file is inactive and grayed out. You can edit the elements of the reference file in the same MicroStation dialogue.
How do I turn off references in MicroStation?
The level display manipulations will be accomplished in all MicroStation views. Double-clicking the command “ Levels Turn OnOff ModelsReferences”, shown above, will produce the “Turn ONOFF Level in all Models and References” dialog, shown below.26 nov. 2008
How do you unlock elements in MicroStation?
Unlock these element under the menu > Edit > Unlock.27 août 2014
What does free do in ProjectWise?
Free – Allows the document to be checked in but ignores any local document changes. This command also purges the document from your local working directory and puts it into your recycle bin. … This does not copy the document outside of ProjectWise.
How do I make a ProjectWise file read only?
Click on the Settings Tab then click on the “+” beside Document List and the “+” beside Double Click Action. Double Click on the “Red Check” and scroll down to Open as read-only and Click OK.
How do I open references in MicroStation?
1. Go to the menu Tools > Key-in.
2. Enter the Key-in: dialog reference open.
3. Reference Dialog opens.
How do I merge references in MicroStation?
From the Reference dialog, select Tools > Merge Into Master, or simply right click a reference attachment and select the option from the pick-list. At this point, MicroStation will ask you to select the view at which time you would enter a datapoint.19 mai 2008
What is a reference file in MicroStation?
Overview. A reference attachment is a model, or MicroStation file (. dgn) attached to and displayed with the active model for plotting or construction purposes. You can attach, as a reference, a model that resides in either the open DGN file, some other DGN file, or a DWG file.15 sept. 2015
How do I copy a reference in MicroStation?
Reference the file containing elements needed to copy, into Master file. Select the elements you wish to copy. Click “Copy” command. Snap (tentative) to a location and accept.31 août 2015
How do I remove level lock in Microstation?
LEVEL LOCKS By default, the level lock is off. You can turn this lock on through the Locks settings dialog. To display this dialog, from the main menu select Settings menu > Locks > Full.
How do I unlock a ProjectWise file?
1. Expand the Deliverables Management node under your associated work area.
2. Expand the Outgoing folder and select the Transmittals folder.
3. Open the transmittal containing the response you want to unlock and select the Responses tab.
How do I freeze a layer in Microstation?
If you want to freeze elements in levels, select Global Freeze. You can also control level display with the Global Display or View Display modes. Alternatively, you can use the Level Manager dialog box to control element display and freeze settings on a level-by-level basis.
How do you use the Bentley ProjectWise?
What does copy Out do in ProjectWise?
Copy Out is used to update files in your local working directory that have been changed or updated in ProjectWise. This option is not used very often. To use Copy Out, right click on the file and select Copy Out. This will copy the file to your local working directory.31 juil. 2015