Contents
What is Ortho in MicroStation?
AccuDraw. AccuDraw is a powerful MicroStation feature that increases drawing productivity by tracking previous drawing steps and anticipating the next steps. When AccuDraw is active, the AccuDraw settings box appears on the MicroStation desktop and the AccuDraw compass appears on data points.
How do you turn on object snap in MicroStation?
In MicroStation CONNECT there is no tool or menu option labeled Button Bar. To display the Snap Mode tool box do the following: Select the Snap icon on the MicroStation status bar has you have always done before. In the ribbon pop-up select the Snap Mode icon.26 août 2016
How do I get my toolbar back on MicroStation?
How do I turn off Snap mode in MicroStation?
When the cursor passes over an element, it will highlight. A single click will delete it. To access the AccuSnap settings, go to the Settings > Snaps > AccuSnap command, or key-in: DIALOG ACCUSNAP. To toggle AccuSnap on and off key in: ACCUSNAP TOGGLE.
How do I turn off Ortho lock in Microstation?
1. (V8i) Settings > Design Files > Axis > make sure (Axis Lock) is turned OFF.
2. (CONNECT) > Settings > File> Design Files > Axis > make sure (Axis Lock) is turned OFF.
3. OR to toggle ortho OFF or ON.
4. key in: Lock axis toggle.
How do I turn on Smart Lock in Microstation?
AccuDraw normally opens automatically, however, if is not active, it can be started by clicking on the AccuDraw icon located on the Primary tools tool bar docked at the top of the application window. This will open a coordinate dialog showing X and Y coordinates.
How do you create multiple snaps in MicroStation?
To access the multi-snap dialog box, you can choose The Snaps>Multi-Snaps option from the Settings menu at the top of the MicroStation screen, choose the “Multi-Snaps” option from the Snaps menu via the Information/Status bar at the bottom of the MicroStation screen, or you can right-click over the Multi-Snap button on …
How do you use Accusnap?
How do you use Accudraw in MicroStation?
How do I recover a file in MicroStation?
1. Open any other design file.
2. Left-click the Utilities drop-down menu.
3. Select DWG.
4. Select Recover.
5. Browse to and highlight the DWG file.
6. Click OK.
7. A message box opens and specifies how many errors were found and how many were fixed.
8. Try to open the file in a normally with MicroStation.
How do I make my MicroStation connect look like V8i?
1. In the Workflow drop down list select Task Navigation.
2. In the Select Task drop down list select V8i Task Theme.
3. The interface changes: ribbon disappears, and Tasks appears on the left side of the view like in MicroStation V8i.
How do you bring up an element selection in MicroStation?
1. Right click on the PopSet tool icon.
2. Select Settings from the pop-up menu.
3. Check on the setting to Allow Ctrl+Space When Disabled.
4. Select OK.
How do I change the default snap in MicroStation?
1. From the bottom Status bar select the Snap icon. In the pop-up menu select Button Bar.
2. Select Settings > Locks > Full from the top menu bar. In the Locks dialog change the Snap Mode drop-down to Keypoint.
How do you open AccuDraw in MicroStation?
To Turn AccuDraw On or Off If you are using the default function key menu, press
What is ACS in Microstation?
ACS (Auxiliary Coordinate Systems)25 fév. 2014