How to turn on smart lock in microstation?

How do you turn on Ortho in MicroStation?

1. (V8i) Settings > Design Files > Axis > make sure (Axis Lock) is turned OFF.

2. (CONNECT) > Settings > File> Design Files > Axis > make sure (Axis Lock) is turned OFF.

3. OR to toggle ortho OFF or ON.

4. key in: Lock axis toggle.

How do I lock axis in MicroStation?

1. Firstly open the menu: Settings > Locks > Full. This opens the Locks dialog to allow you to see which locks are switched on and off.

2. The lock axis may be set ON, and can be seen in the following keyin: Utilities>Keyin> Lock Axis.

3. The Grid Lock may also be checked ON, Select the following:

How do I turn off civil AccuDraw?

Click the Toggle Civil AccuDraw icon to activate or deactivate AccuDraw. Click the Shortcuts icon to access Civil AccuDraw Settings dialog.

What is ACS in MicroStation?

ACS (Auxiliary Coordinate Systems)25 fév. 2014

How do I change the default snap in MicroStation?

1. From the bottom Status bar select the Snap icon. In the pop-up menu select Button Bar.

2. Select Settings > Locks > Full from the top menu bar. In the Locks dialog change the Snap Mode drop-down to Keypoint.

What is Ortho in MicroStation?

AccuDraw. AccuDraw is a powerful MicroStation feature that increases drawing productivity by tracking previous drawing steps and anticipating the next steps. When AccuDraw is active, the AccuDraw settings box appears on the MicroStation desktop and the AccuDraw compass appears on data points.

How do I lock a line in Microstation?

When drawing a line, press Enter to set Smart Lock. Smart Lock will lock your direction in either X or Y depending on the current position of your cursor from the AccuDraw compass at the time you press Enter. If you are further along the X axis than the Y axis, the lock is set to X.

How do you open AccuDraw in Microstation?

To Turn AccuDraw On or Off If you are using the default function key menu, press . The AccuDraw window opens. If it is already docked or open, pressing sends input focus to the AccuDraw window. Select the Toggle AccuDraw tool ( View > Home > Primary > More ).

How do I change AccuDraw settings in Microstation?

AccuDraw is used to streamline the drawing process by assisting in the rapid and accurate placement of data points while placing and manipulating elements. You can access this dialog from the following: Ribbon: File > Settings > User > AccuDraw Settings. Default keyboard shortcut: .

What is civil AccuDraw?

Civil AccuDraw interprets an offset as positive or negative depending on the position of the pointer. Values are acknowledged as Positive when the pointer is to the Right of the Base Element and Negative to the Left. This feature can also be Toggled OFF in Civil AccuDraw Settings.

How do you rotate AC in Microstation?

To rotate the active ACS Select the Rotate Active ACS tool. The Rotate Active ACS dialog box opens. In the Rotate fields, enter the rotation angles, in degrees, from left to right, for the x-, y-, and z-axes.

How do I turn off snap in MicroStation?

1. Go to Settings > Snaps > AccuSnap.

2. Switch to General tab (default).

3. Uncheck “Enable” AccuSnap.

4. Close AccuSnap settings.

How do I turn off grid snap in MicroStation?

1. From the Settings menu, choose View Attributes (or press ). or. From any view window’s control menu, choose View Attributes.

2. From the View Number option menu, choose the number of the desired view.

3. Turn Grid on or off.

4. Click Apply.

How do you turn on object snap in MicroStation?

In MicroStation CONNECT there is no tool or menu option labeled Button Bar. To display the Snap Mode tool box do the following: Select the Snap icon on the MicroStation status bar has you have always done before. In the ribbon pop-up select the Snap Mode icon.26 août 2016

How do you use Accudraw in Microstation?