Contents
How do you make fence snaps in MicroStation?
1. Although “Accu Snap” is enabled, it does not work when placing a fence.
2. There are two possibilities:
3. Press the “CTRL” + “SHIFT” keys at the same time.
4. From the menu item “Settings” > “Snaps” > “Accu Snap”
Where are snaps in MicroStation?
To access the multi-snap dialog box, you can choose The Snaps>Multi-Snaps option from the Settings menu at the top of the MicroStation screen, choose the “Multi-Snaps” option from the Snaps menu via the Information/Status bar at the bottom of the MicroStation screen, or you can right-click over the Multi-Snap button on …
How do you use tentative snap in MicroStation?
1. Click “Remap Buttons”
2. Highlight Tentative.
3. Place cursor in “Button Definition area”
4. Click desired button(s) to assign to tentative.
How do I turn on Accu snap in MicroStation?
To access the AccuSnap settings, go to the Settings > Snaps > AccuSnap command, or key-in: DIALOG ACCUSNAP. To toggle AccuSnap on and off key in: ACCUSNAP TOGGLE.
How do I change the default snap in MicroStation?
1. From the bottom Status bar select the Snap icon. In the pop-up menu select Button Bar.
2. Select Settings > Locks > Full from the top menu bar. In the Locks dialog change the Snap Mode drop-down to Keypoint.
How do I turn off grid snap in MicroStation?
1. From the Settings menu, choose View Attributes (or press
2. From the View Number option menu, choose the number of the desired view.
3. Turn Grid on or off.
4. Click Apply.
How do I turn off orthogonal in MicroStation?
1. (V8i) Settings > Design Files > Axis > make sure (Axis Lock) is turned OFF.
2. (CONNECT) > Settings > File> Design Files > Axis > make sure (Axis Lock) is turned OFF.
3. OR to toggle ortho OFF or ON.
4. key in: Lock axis toggle.
How do you use Accusnap?
How do you use Accudraw in MicroStation?
Tentative
What is the meaning of tentative date?
Tentative is from the Latin tentare (“to attempt”), and its original meaning was “attempted, provisional, experimental.” It is easy to see how this emphasis on trial and error led to the word’s current sense “not fully worked out or developed” (as in “a tentative date,” “tentative plans,” “a tentative job offer”).
How do you open AccuDraw in Microstation?
To Turn AccuDraw On or Off If you are using the default function key menu, press
How do you create a grid in MicroStation?
Under the Settings menu, select View Attributes or use the shortcut key to display the dialog box. In the View Attributes dialog the grid toggle will be found in alphabetical order. To set the grid per view, select the View Window and select Apply. To apply the grid to all views, select All.6 sept. 2013
What is Ortho in MicroStation?
AccuDraw. AccuDraw is a powerful MicroStation feature that increases drawing productivity by tracking previous drawing steps and anticipating the next steps. When AccuDraw is active, the AccuDraw settings box appears on the MicroStation desktop and the AccuDraw compass appears on data points.
How do I turn on Smart Lock in MicroStation?
AccuDraw normally opens automatically, however, if is not active, it can be started by clicking on the AccuDraw icon located on the Primary tools tool bar docked at the top of the application window. This will open a coordinate dialog showing X and Y coordinates.