Contents
Can you match properties in MicroStation?
To match element attributes anytime – even when you are already right in the middle of drawing an element. Press the “Alt”-key – move your cursor to the element you want to match the attributes from – left-mouse-click. The properties of the element become the active attributes.18 avr. 2014
How do you match Hatch properties in MicroStation?
MicroStation V8. 5 – If you use the SmartMatch tool on a hatched/patterend element, it will match the symbology of the boundary element and not the hatch. To match the symbology of the hatching, select Match Pattern Attributes and enable Match Symbology.19 jui. 2008
How do you match text attributes in MicroStation?
1. In the Text toolbox, select the Match Text Attributes tool.
2. Select the previously placed text element.
3. Accept the match.
How do you show properties in MicroStation?
To open the property grid, pick View>Properties from the HAMMER CONNECT menu. You can also review or modify MicroStation drawing information about an element(s), such as its type, attributes, and geometry, by using the Element Information dialog.
How do you match pattern attributes in MicroStation?
Match Pattern Attributes MicroStation prompts: Match Pattern Attributes> Identify element (Identify the element containing the pattern to be matched.) Match Pattern Attributes > Accept/Reject (select next input) (Click the Data button to accept the element or click the Reset button to reject it.)
How do you match text in MicroStation v8i?
How do I change hatch in MicroStation?
MicroStation V8. 5 – To quickly and easily change the symbology of hatching, select Modify Pattern, enable Attributes and select the hatch. The hatch will adopt your active attributes.19 jui. 2008
How do you trim hatch in MicroStation?
1. Select the edges bounding the concrete and the square shape that you don’t want patterned.
2. Isolate the selection using Displayset.
3. Repattern the area using the following settings (obviously set Pattern/Scale/Angle as required)
How do I use the pattern area in MicroStation?
To pattern an area using the Element, Fence, or Flood method: 1. From the Patterning toolbox, select the Pattern Area tool (R3). 2. In the Tool Settings area for this tool, set all the desired settings including the required cell with which you want to pattern the area.
How do I change multiple text sizes in MicroStation?
Select by Attributes, and choose Text and Text Nodes, Execute to highlight the text. If all the text is going to be the same font size then you can Change Text Attributes with only the Height, Width, and Line Spacing check marked, which will keep the original Justification.9 déc. 2008
How do I change line attributes in MicroStation?
1. Select the elements required to be changed.
2. Choose the ‘Change Element Attributes’ tool from the Ribbon ( or popup menu )
3. In the Tool Settings dialog, place a checkmark(s) against the attribute to change and select the required Attribute.
How do I change text size in MicroStation?
Solution. Navigate to Workspace > Preferences > Look and Feel and find the following setting: Click Font… and the following box opens: With this box, you are able to change the size, style, and font of the text used by most dialog boxes in MicroStation.22 déc. 2015
How do you select an element in MicroStation?
1. To select a single element.
2. To select one or more elements.
3. To select an additional element.
4. To select one or more additional elements.
5. To deselect an element.
6. To deselect all elements.
How do I change the pattern scale in Microstation?
1. Open Hatch Area/Crosshatch Area and change the value(s) (i.e scale was 10 should be 5)
2. Go to Tools > Patterning > Change Pattern.
3. check Pattern Parameters and select the hatch pattern that needs to be rescaled.
How do you join lines in Microstation?
Press “Alt + T” to drop down the tools menu and from “Groups” select the very first option that says “Create Complex Chain.” Go ahead and click the 2 lines that you would like to join and then click anywhere a third time. Your lines are now a singular element. Or even more simply, a Line.