Contents
How do you make a perpendicular snap in MicroStation?
1. In the AccuSnap Settings dialog box, General tab, turn off Fixed Point for Perp./Tan.
2. Select either Perpendicular Snap, or Perpendicular Snap Point, as the active snap mode.
3. Move the pointer over the element, so that it is highlighted.
How do you snap to a line in MicroStation?
What is the AccuDraw in MicroStation?
AccuDraw is a powerful MicroStation feature that increases drawing productivity by tracking previous drawing steps and anticipating the next steps. When AccuDraw is active, the AccuDraw settings box appears on the MicroStation desktop and the AccuDraw compass appears on data points.
How to use AccuDraw in MicroStation?
Where are snaps in MicroStation?
To access the multi-snap dialog box, you can choose The Snaps>Multi-Snaps option from the Settings menu at the top of the MicroStation screen, choose the “Multi-Snaps” option from the Snaps menu via the Information/Status bar at the bottom of the MicroStation screen, or you can right-click over the Multi-Snap button on …
How do I change the default snap in MicroStation?
1. From the bottom Status bar select the Snap icon. In the pop-up menu select Button Bar.
2. Select Settings > Locks > Full from the top menu bar. In the Locks dialog change the Snap Mode drop-down to Keypoint.
What is AccuSnap MicroStation?
Overview. AccuSnap allows you to snap elements with a single mouse click. By default, AccuSnap is toggled ON when MicroStation is opened. Notice that whenever the cursor is waiting for a data point and it nears an element, two symbols will appear and an element in the file is highlighted.
How do I turn off the grid in MicroStation?
1. Open the View Attributes dialog > Ctrl + B.
2. Toggle the Grid On/Off for the desired view.
How do I turn off grid snap in MicroStation?
1. From the Settings menu, choose View Attributes (or press
2. From the View Number option menu, choose the number of the desired view.
3. Turn Grid on or off.
4. Click Apply.
What is ACUdraw 50?
ACUdraw is Ten Point’s cranking system. ACUdraw 50 is their integrated rope cocker. Both systems are built into the crossbow. … It is made exclusively for TenPoint crossbows and will not work on any other crossbow brand. The ACUdraw system is fully integrated into the stock of your Ten Point and has no dangling parts.27 jan. 2014
How do I turn on compass in MicroStation?
1. Go to File > Settings > User > AccuDraw [AccuDraw settings open]
2. Enable “Floating Origin”.
3. Close and go to File > Save Settings.
How does the ACUdraw work?
The ACUdraw PRO converts crossbow draw weights to 8.5-pounds of effort. It features a newly designed internal gear system that silently cocks the crossbow and reduces the number of cranks needed to do so. … New auto-engage lever activates the gear system immediately as cranking begins. Draws the bow accurately every time.15 août 2019
How do you draw a line with coordinates in MicroStation?
How do you turn on Ortho in MicroStation?
1. (V8i) Settings > Design Files > Axis > make sure (Axis Lock) is turned OFF.
2. (CONNECT) > Settings > File> Design Files > Axis > make sure (Axis Lock) is turned OFF.
3. OR to toggle ortho OFF or ON.
4. key in: Lock axis toggle.
How do I change AccuDraw in MicroStation?
In MicroStation V8i one could switch, or toggle, between Polar and Cartesian coordinate system by tapping the Spacebar while AccuDraw is in focus.17 août 2016