Microstation

How to change ucs in microstation v8i?

Contents

How do I change my AC in MicroStation?

This is opened from the Settings menu > Drawing Scale. It should be docked at the bottom of the MicroStation window with the subunit and ACS Scale items turned off. Selecting an ACS from this pop‐up will only set the ACS for the Active View.25 fév. 2014

How do I change my global origin in MicroStation?

How do I set the global origin? The global origin is set by using the key-in: GO=,, (without the use of the <> symbols). After the coordinate values have been entered into the key-in window and the key-in has been accepted, there are two methods in setting the origin.6 sept. 2013

How do I change the view in MicroStation?

Opening and Arranging Views You can resize the MicroStation views by clicking and dragging the view edges.

How do you lock the Z axis in MicroStation?

The Sticky Z lock option can be toggled on and off under the AccuDraw Settings dialog box in the Operation tab. Sticky Z lock, when toggled on, allows for consecutive operations of placing elements on the same Z elevation when the Z axis is locked on the AccuDraw dialog box.4 sept. 2014

How do you rotate AC in MicroStation?

To rotate the active ACS Select the Rotate Active ACS tool. The Rotate Active ACS dialog box opens. In the Rotate fields, enter the rotation angles, in degrees, from left to right, for the x-, y-, and z-axes.

INTERESTING:   Why microstation leader arrow?

How do you turn off Ortho in MicroStation?

1. (V8i) Settings > Design Files > Axis > make sure (Axis Lock) is turned OFF.

2. (CONNECT) > Settings > File> Design Files > Axis > make sure (Axis Lock) is turned OFF.

3. OR to toggle ortho OFF or ON.

4. key in: Lock axis toggle.

What is global origin MicroStation?

The “global origin” of a MicroStation design file (V7) or model (V8) is a setting which defines where, relative to the MicroStation design plane (2D) or cube (3D), the point where X=0, Y=0 and, for 3D files, Z=0 is located.

How do you twist view in MicroStation?

To rotate a view across a specific plane enable AccuDraw and press . You can change the AccuDraw plane to change the plane of rotation. Rotates the view about its center.

How do you save a view in MicroStation?

How do you rotate view in Aecosim?

1. Select the Rotate View control .

2. Set Rotate View Method to 2 Points.

3. Enter a data point to select the view to rotate and define the origin of the view x-axis.

4. Enter a data point to define the positive direction of the view x-axis.

How do I lock a line in Microstation?

When drawing a line, press Enter to set Smart Lock. Smart Lock will lock your direction in either X or Y depending on the current position of your cursor from the AccuDraw compass at the time you press Enter. If you are further along the X axis than the Y axis, the lock is set to X.

How do you use Accudraw in Microstation?

INTERESTING:   How to export kmz from microstation?

How do you rotate 90 degrees in Microstation?

How do I change the default snap in MicroStation?

1. From the bottom Status bar select the Snap icon. In the pop-up menu select Button Bar.

2. Select Settings > Locks > Full from the top menu bar. In the Locks dialog change the Snap Mode drop-down to Keypoint.

Where are snaps in MicroStation?

To access the multi-snap dialog box, you can choose The Snaps>Multi-Snaps option from the Settings menu at the top of the MicroStation screen, choose the “Multi-Snaps” option from the Snaps menu via the Information/Status bar at the bottom of the MicroStation screen, or you can right-click over the Multi-Snap button on …

Back to top button

Adblock Detected

Please disable your ad blocker to be able to view the page content. For an independent site with free content, it's literally a matter of life and death to have ads. Thank you for your understanding! Thanks