Microstation

How to break a complex chain in microstation?

Contents

How do you break elements in MicroStation?

How do you make a complex chain in MicroStation?

1. Select the Create Complex Chain tool.

2. Set Method to Manual.

3. Identify the first element to include in the chain.

4. Continue to identify elements to add to the chain. If they are not already connected, the elements are connected as they are identified.

5. Reset to complete the complex chain.

How do you break a shared cell in MicroStation?

You can place your cell to your drawing, then drop the cell. Drop is a tool that will break your element to simpler elements. You created cell from several elements, and drop element will break the cell back to the original elements.

How do I make a group Hole in MicroStation?

1. Select the Group Holes tool.

2. Identify the solid element.

3. Identify the hole element(s) to associate with the solid.

4. Accept the last element.

5. Reset. The solid and holes are consolidated into a group (orphan cell). The area attribute (solid or hole) of each element is set appropriately.

Where is the drop element tool in MicroStation?

Selecting the down arrow next to the Drop Element icon in the ribbon panel will present a drop down list of options. Selecting Drop Element will display the tool settings window with the options available in previous editions of MicroStation, plus a new option to use a fence.Mar. 27, 2017

How do you trim hatch in MicroStation?

INTERESTING:   How to bring a level to the front in microstation?

1. Select the edges bounding the concrete and the square shape that you don’t want patterned.

2. Isolate the selection using Displayset.

3. Repattern the area using the following settings (obviously set Pattern/Scale/Angle as required)

How do you combine two smart lines in MicroStation?

Press “Alt + T” to drop down the tools menu and from “Groups” select the very first option that says “Create Complex Chain.” Go ahead and click the 2 lines that you would like to join and then click anywhere a third time. Your lines are now a singular element. Or even more simply, a Line.

Where is the Create Region tool MicroStation?

1. Ribbon: Drawing > Home > Groups.

2. Ribbon: Modeling > Home > Groups.

3. Toolbox: Groups.

How do I edit a shared cell in MicroStation?

If you have already placed the cell, you can key-in the command DROP SHARECELL. The system will prompt you Convert Shared cell to Unshared Cell > Identify element. Once you have selected the element you can now edit the text within the cell.

What is explode in MicroStation?

AutoCAD Explode Command. In MicroStation, use the tools in the Drop tool box (Tools > Drop) to break elements into simpler components. The Drop Element tool is for general usage. It operates one level (layer) at a time, so that some elements must be dropped more than once.

How do you change cells in MicroStation?

In the Replace Cells dialog box, set Method to Replace and Mode to Single. If Use Active Cell is off, select chair1. cell, and then select the cell to replace it. If Use Active Cell is on, make sure the active cell is the one that’s to replace chair1.Jul. 21, 2009

INTERESTING:   What is a microstation seed file?

What is a grouped hole in Microstation?

A A Grouped Hole is an anonymous cell. The cell contains an outer shape that encloses one or more inner shapes. The outer shape is marked as a solid, and the inner shapes are marked as holes. … In a Grouped Hole and other 2D elements, solid and hole indicate that a shape should be considered as filled or hollow.Jun. 27, 2016

How do I drop an element in Openroads?

Using the Element Selection tool, select the graphic element for the geometry and hover on the element to display the Context Tool Box. Select the option to ‘Delete’ to delete the element from the Design File. 3.Apr. 17, 2019

What is MicroStation software used for?

MicroStation is a CAD software platform for two- and three-dimensional design and drafting, developed and sold by Bentley Systems and used in the architectural and engineering industries. It generates 2D/3D vector graphics objects and elements and includes building information modeling (BIM) features.

How do you add hatching to MicroStation?

To hatch around text inside of a closed element use the Flood method, select the down arrow in the lower right corner of the Tool Settings window to “Show Extended Settings”. Select the Locate Interior Text icon. Using this option will cause the hatching to go around the text within the closed element.

Back to top button

Adblock Detected

Please disable your ad blocker to be able to view the page content. For an independent site with free content, it's literally a matter of life and death to have ads. Thank you for your understanding! Thanks