Contents
How do you send a hatch to back in MicroStation?
1. Select the element(s) to be sent to back.
2. Open the Level Display dialog and turn on all of your levels.
3. Using Power Selector invert mode select every element in your model.
How do you flood a pattern in MicroStation?
Annotate > Hatch Tool (Flooded) > Press Ctrl + Shift > Select the areas to flood.24 fév. 2017
How do you trim hatch in MicroStation?
1. Select the edges bounding the concrete and the square shape that you don’t want patterned.
2. Isolate the selection using Displayset.
3. Repattern the area using the following settings (obviously set Pattern/Scale/Angle as required)
How do I change hatch pattern in MicroStation connect edition?
1. Create new element template.
2. Add>Pattern/Hatch Settings.
3. Change Area Pattern Is Annotation value to True(this should be the default value)
How do I bring an object to the front in MicroStation?
MicroStation V8 2004 Edition – Use Edit > Bring to Front 07.24 and later, you can change the element order by first creating a selection set of the elements you want to bring to the front and then selecting Edit > Bring to Front. To make it even easier, just put order element front on a function key and away you go!13 mai 2008
How do I move a reference back to MicroStation?
1. Go to File > Reference to open the References dialog box.
2. In the Reference dialog box, go to Settings > Update Sequence to open the Update Sequence dialog box.
3. In the Update Sequence dialog box select the Reference (or active file) and then click the up or down arrow buttons to move the file up or down.
How do I fill an object in MicroStation?
How do I fill a shape in MicroStation?
How do I make a complex shape in MicroStation?
1. Create Complex Shape > Identify element (Identify the first element to include in the complex shape.)
2. Create Complex Shape > Accept/Reject (Select next input) (Identify the next element to include in the complex shape and continue selecting elements in order until all elements are selected.
How do you trim multiple in MicroStation?
How do you join lines in MicroStation?
Press “Alt + T” to drop down the tools menu and from “Groups” select the very first option that says “Create Complex Chain.” Go ahead and click the 2 lines that you would like to join and then click anywhere a third time. Your lines are now a singular element. Or even more simply, a Line.
How do you hatch in Openroads?
How do you change the hatch scale in MicroStation?
1. Open Hatch Area/Crosshatch Area and change the value(s) (i.e scale was 10 should be 5)
2. Go to Tools > Patterning > Change Pattern.
3. check Pattern Parameters and select the hatch pattern that needs to be rescaled.
How do I create a pattern in MicroStation?
1. Open the Cell Library dialog box by going to Element>Cells.
2. Choose the cell you would like to use as your pattern, and click on Pattern.
3. Open the Pattern Area tool, which can be done by going to Tools>Patterning>Pattern Area.