Contents
How do you put a tube in a Fusion 360?
In what Workspace do you create a subdivided pipe?
In the Create panel, select Pipe. The Pipe dialog box appears. Across the top there are three tabs: Sections, End Types, and Segments.
How do you make a hollow pipe in Fusion 360?
How do you make a path in Fusion 360?
Does Fusion 360 have a frame generator?
there’s no frame generator in fusion 360.10 mar. 2018
How do you thicken a line in Fusion 360?
When selecting a motor the first 4 numbers for example MR2205 represent what?
1. first 4 numbers, for example MR2205, represent what? The max RPM of the motor.
Where can you find the center of mass measurement at in Fusion 360?
1. Model Enviroment, Inspect panel > Center of Mass.
2. Select the component you want and the you should be able to see a glyph identifying the center of mass.
How do you cut a body in Fusion 360?
1. From the Solid menu select Modify > Split body.
2. Select Body to Split.
3. Select Body to use as the splitting tool.
4. Select OK to create the split.
How do you cut out a shape in Fusion 360?
How do you build a path in fusion?
How do you make a 3D sketch in Fusion 360?
1. Select the Solid tab in the Design workspace. Select Create Sketch in the toolbar.
2. Select the initial plane or face to begin the sketch on.
3. Check the 3D Sketch box in the Sketch Palette.
How do you copy a curve in Fusion 360?
Does Fusion 360 have weldments?
Weldments can be placed in an assembly, subassembly, or assembly weldment just like any other component. Weldments can also be derived the same as a normal assembly.
When selecting a motor the first 4 numbers represent what?
Motor Size and KV Brushless motors are typically categorized by a four-digit number – such as **##. where as the “**” numbers are the stator width and “##” is the stator height. Essentially, the wider and taller the motor is, the larger the numbers are and the more torque it can produce.11 avr. 2019