Contents
Can you duplicate a sketch in Fusion 360?
To copy and paste a sketch into another sketch, perform the following: Select the sketch entities to be copied (either left-click or window select). Right-click and select Copy. Click to deselect the copied entities.3 fév. 2021
How do you duplicate in fusion?
How do you copy and paste a body in Fusion 360?
1. Right-click on the body in the browser then select Copy.
2. Activate the destination design.
3. Right-click on the top node in the browser and select Paste.
How do you move the sketch plane in Fusion 360?
How do I export from STL Fusion 360?
To export an individual component or body, simply right-click the component or body in the design browser tree, and select “Save As STL” from the drop-down menu. This will open the same panel where you can configure your mesh settings. You can also change the component or body selection from this window.2 mai 2019
How do you copy and paste a body in fusion?
How do I copy from one project to another in Fusion 360?
Expand the Data Panel and navigate to the file. Right-click and select Move. A window will appear providing a choice of destinations for the file. Select the destination and click Move.15 déc. 2020
How do you break the link between copied components in Fusion 360?
Right-click on the component in the browser, select “Break Link”.5 avr. 2017
How do you combine sketches in Fusion 360?
There is no separate command to combine two sketches into one. However one option is you can Project one sketch into another using the Sketch->Project/Include->Sketch command.22 nov. 2016
How do you move the offset plane in Fusion 360?
If the offset plane is the one you want to use to move your sketch or sketches, drag it in the timeline ahead of the sketch you want to move. Then right click on the desired sketch in the timeline and choose Redefine Sketch Plane. Then select the offset workplane. Take a look at the Screencast.5 août 2020
How do you increase the size of the plane in Fusion 360?
Show or unhide the plane, click drag on an edge or corner point, to change it’s size.14 jan. 2020
How do I project to surface Fusion 360?
Why does Fusion 360 take so long to export STL?
Fusion 360 exports STL files locally, so there is no influence of the cloud or internet bandwidth. But your 3D model has to be meshed to export STL. And the mesh granularity (triangle size, density) – if set to very detailed – can make the resulting file huge and slow to produce.