Fusion 360

How to do a revolve in fusion 360?

Contents

What does the revolve tool do in Fusion 360?

Fusion 360’s revolve tool is capable of creating surface features. The profile will be an open profile that will have complete dimensions that are linear. The centerline to the right of the open profile is a construction line that also mimics the linear dimensions placed on the right.8 août 2020

How do you use revolve?

1. Select a sketch.

2. Click Revolve from the mini toolbar or the Shapes group.

3. Select an axis for the revolve.

4. Select Solid from the dashboard.

5. Specify to revolve from a sketch plane by a specified angle value.

6. Edit the angle to 180.

7. Click Flip Direction.

8. Click Thicken Sketch.

How do you make a spiral in Fusion 360?

1. Ensure 3D Sketch is turned on by going to Preferences > Design and checking the box next to “Allow 3D sketching of lines and splines.”

2. Go to Create > Coil and set the desired diameter.

What does the revolve tool do?

ℹ️ This tool is available to all users. You can create solids such as sphere, cylinders, and cones by revolving faces or closed sketches with the Revolve tool. Not only that, but you can also create helical objects by adding height to your revolved sketch or face.

How do you extrude along a path in Fusion 360?

What is revolve in fusion?

The Revolve command creates T-Spline, solid, or surface revolved features by sweeping sketch and model geometry around an axis. Note: When you invoke the Revolve command, and there is only one profile visible in your design, it gets automatically selected.

INTERESTING:   Is fusion 360 vs solidworks?

What are the two components necessary for creating a revolve feature?

There are two ways to created revolved features: from a sketch profile or from a primitive. The primitive shape creation commands create full revolutions only. They do not create surfaces or partial revolutions.8 fév. 2016

What is needed to revolve a feature?

A revolved feature is an axisymmetric shape that is created by revolving an open or closed section view by a specified angle around a central axis. The section can represent a protrusion or a cut, that is, it can either add material or take it away. We are going to create the part shown in Figure 1.

How do you cut a revolve in Solidworks?

1. Open a sketch on a face or plane, and sketch a profile of the cut.

2. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.

3. Set the options as needed in the Extrude or Revolve PropertyManager.

How do you access preferences in Fusion 360?

To open the preferences, left-click your name in the top right corner of Fusion 360 and select Preferences.21 août 2018

How do you make a 3D spiral?

1. Click 3D Geometry and then, in the 3D Curve group, click More next to Spline 3D.

2. Click Spiral 3D/Helix in the Direct section.

3. Type a name for Part.

4. Specify the type of spiral: Helical, Conical, or Planar.

5. Specify the axis with the Axis 3D CoPilot.

How do you make a spiral in sketch?

Make a rectangle and with the rectangle selected go to Plugins -> 🌀6Spiral – Make Spiral or use the shortcut Control + Shift + 6 . Change the parameters to get the shape of the spiral/helix that you’d like as seen in the above GIFs.13 sept. 2018

INTERESTING:   How to use sphere in fusion 360 ?

What is an example of revolve?

Revolve is defined as to think about something, or cause to move in a circle. An example of revolve is thinking about work while trying to go to sleep. An example of revolve is spinning a toy top. An example of revolve is a ballet dancer doing a pirouette. verb.

How do you revolve on shape?

How do you use the revolve feature on shape?

Back to top button

Adblock Detected

Please disable your ad blocker to be able to view the page content. For an independent site with free content, it's literally a matter of life and death to have ads. Thank you for your understanding! Thanks